lkml.org 
[lkml]   [2018]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/31] Introduced new Cadence USBSSP DRD Driver
From
Date
Hi Pawel,

On 19/07/18 20:57, Pawel Laszczak wrote:
> This patch set introduce new Cadence USBSSP DRD driver
> to linux kernel.
>
> The Cadence USBSSP DRD Driver s a highly
> configurable IP Core which can be
> instantiated as Dual-Role Device (DRD),
> Peripheral Only and Host Only (XHCI)
> configurations.
>
> The current driver has been validated with
> FPGA burned. We have support for PCIe
> bus, which is used on FPGA prototyping.
>
> The host site of USBSSP controller is compliance
> with XHCI specification, so it works with
> standard XHCI linux driver.
>
> Also, device side of USBSSP controller was designed
> in such way to looks like XHCI. It means that
> most of logic of USBSSP controller is also compliance
> with XHCI specification.
>
> Consequently, the USBSSP driver for peripheral mode
> is very similar to XHCI driver.
>
> This version of driver supports only Device mode but
> DRD and Host mode will be added in the future.
>

Based on the posting date this series looks like v3.

You should add the version prefix to the patches next time.
e.g. [PATCH v4 ...]

It is also recommended to add a Change-log in the cover letter
explaining what changes were made in each revision.

There are a bunch of checkpatch warnings in this series.
You can use ./scripts/checkpatch.pl on the patches and fix the
issues.

> ---
>
> Pawel Laszczak (31):
> usb: usbssp: Defined register maps and other useful structures.
> usb: usbssp: Added some decoding functions.
> usb: usbssp: Add trace events used in driver
> usb: usbssp: Added USBSSP platform driver
> usb: usbssp: Added first part of initialization sequence.
> usb: usbssp: added template functions used by upper layer.
> usb: usbssp: Initialization - added usbssp_mem_init
> usb: usbssp: Added ring and segment handling functions.
> usb: usbssp: add implementation of usbssp_mem_cleanup
> usb: usbssp: added usbssp_trb_in_td function.
> usb: usbssp: added function for stopping driver.
> usb: usbssp: added functions for queuing commands.
> usb: usbssp: addec procedure for handlin Port Status Change events.
> usb: usbssp: added procedure handling command completion events.
> usb: usbssp: added device controller error, transfer and SETUP
> completion event.
> usb: usbssp: added connect/disconnect procedures.
> usb: usbssp: added implementation of usbssp_halt_endpoint function.
> usb: usbssp: added handling of Port Reset event.
> usb: usbssp: added support for USB enumeration process.
> usb: usbssp: added queuing procedure for control transfer.
> usb: usbssp: added queuing procedure for BULK and INT transfer.
> usb: usbssp: added procedure removing request from transfer ring
> usb: usbssp: added implementation of transfer events.
> usb: usbssp: added detecting command timeout.
> usb: usbssp: added implementation of usbssp interface.
> usb: usbssp: added endpoint configuration functionality.
> usb: usbssp: implements usbssp_gadget_ep_enable function
> usb: usbssp: implemented usbssp_gadget_ep_disable function.
> usb: usbssp: added support for LPM.
> usb: usbssp: added support for TEST_MODE.
> usb: usbssp: add pci to platform driver wrapper.
>
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 2 +
> drivers/usb/usbssp/Kconfig | 29 +
> drivers/usb/usbssp/Makefile | 15 +
> drivers/usb/usbssp/gadget-dbg.c | 39 +
> drivers/usb/usbssp/gadget-ep0.c | 571 +++++
> drivers/usb/usbssp/gadget-ext-caps.h | 102 +
> drivers/usb/usbssp/gadget-if.c | 569 +++++
> drivers/usb/usbssp/gadget-mem.c | 1938 +++++++++++++++
> drivers/usb/usbssp/gadget-port.c | 287 +++
> drivers/usb/usbssp/gadget-ring.c | 3452 ++++++++++++++++++++++++++
> drivers/usb/usbssp/gadget-trace.c | 13 +
> drivers/usb/usbssp/gadget-trace.h | 482 ++++
> drivers/usb/usbssp/gadget.c | 1909 ++++++++++++++
> drivers/usb/usbssp/gadget.h | 2373 ++++++++++++++++++
> drivers/usb/usbssp/usbssp-pci-wrap.c | 226 ++
> drivers/usb/usbssp/usbssp-plat.c | 186 ++
> 17 files changed, 12195 insertions(+)
> create mode 100644 drivers/usb/usbssp/Kconfig
> create mode 100644 drivers/usb/usbssp/Makefile
> create mode 100644 drivers/usb/usbssp/gadget-dbg.c
> create mode 100644 drivers/usb/usbssp/gadget-ep0.c
> create mode 100644 drivers/usb/usbssp/gadget-ext-caps.h
> create mode 100644 drivers/usb/usbssp/gadget-if.c
> create mode 100644 drivers/usb/usbssp/gadget-mem.c
> create mode 100644 drivers/usb/usbssp/gadget-port.c
> create mode 100644 drivers/usb/usbssp/gadget-ring.c
> create mode 100644 drivers/usb/usbssp/gadget-trace.c
> create mode 100644 drivers/usb/usbssp/gadget-trace.h
> create mode 100644 drivers/usb/usbssp/gadget.c
> create mode 100644 drivers/usb/usbssp/gadget.h
> create mode 100644 drivers/usb/usbssp/usbssp-pci-wrap.c
> create mode 100644 drivers/usb/usbssp/usbssp-plat.c
>

--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-08-01 13:29    [W:0.341 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site