lkml.org 
[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock
Date
Thank you, Thierry. 
Have you also reviewed and accepted the other 3 patches in this serial?

Regards,
Shenwei

-----Original Message-----
From: Thierry Reding [mailto:thierry.reding@gmail.com]
Sent: Monday, July 9, 2018 12:09 PM
To: Shenwei Wang <shenwei.wang@nxp.com>
Cc: linux-pwm@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock

On Fri, Jun 08, 2018 at 02:22:34PM -0500, shenwei.wang@nxp.com wrote:
> The current driver assumes that the ftm_sys clock works as one of the
> clock sources for the IP block as well as the IP interface clock. This
> assumption does not apply any more on the latest i.MX8x SoC family. On
> i.MX8x SoCs, a dedicated IP interface clock is introduced and it must
> be enabled before accessing any FTM registers. Moreover, the clock can
> not be used as the source clock for the FTM IP block. This patch
> introduces the ipg_clk as the dedicated IP interface clock and by
> default it is the same as the ftm_sys clock if not specified.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
> ---
> drivers/pwm/pwm-fsl-ftm.c | 22 ++++++++++++++++------
> 1 file changed, 16 insertions(+), 6 deletions(-)

Applied, thanks.

Thierry

\
 
 \ /
  Last update: 2018-07-09 21:01    [W:0.302 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site