lkml.org 
[lkml]   [2018]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] IIO: st_accel_i2c.c: Use probe_new() instead of probe()
On Tue, 3 Jul 2018 08:06:57 +0200
Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> wrote:

> struct i2c_device_id argument of probe() is not used, so use probe_new()
> instead.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Thanks,

Jonathan

> ---
> drivers/iio/accel/st_accel_i2c.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index d02298f0256c..2ca5d1f6ade0 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -139,8 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> };
> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
>
> -static int st_accel_i2c_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +static int st_accel_i2c_probe(struct i2c_client *client)
> {
> struct iio_dev *indio_dev;
> struct st_sensor_data *adata;
> @@ -179,7 +178,7 @@ static struct i2c_driver st_accel_driver = {
> .of_match_table = of_match_ptr(st_accel_of_match),
> .acpi_match_table = ACPI_PTR(st_accel_acpi_match),
> },
> - .probe = st_accel_i2c_probe,
> + .probe_new = st_accel_i2c_probe,
> .remove = st_accel_i2c_remove,
> .id_table = st_accel_id_table,
> };

\
 
 \ /
  Last update: 2018-07-07 18:35    [W:0.059 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site