lkml.org 
[lkml]   [2018]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] devicetree/bindings: display: Add document for rockchip RGB output
From
Date
Hi Rob Herring,
Thanks for your review.

在 2018/7/4 2:25, Rob Herring 写道:
> On Tue, Jun 26, 2018 at 03:15:39PM +0800, Sandy Huang wrote:
>> This path add support rv1108 and px30 rgb output interface driver.
>
> Bindings are for h/w, not drivers.
>
I will update at next version as following:
This patch add support rv1108 and px30 rgb output interface
>>
>> Signed-off-by: Sandy Huang <hjc@rock-chips.com>
>> Link: https://patchwork.freedesktop.org/patch/msgid/1509522765-118759-1-git-send-email-hjc@rock-chips.com
>> ---
>>
>> Changes in v4: Add support px30
>> Changes in v3: None
>> Changes in v2: None
>>
>> .../bindings/display/rockchip/rockchip-rgb.txt | 73 ++++++++++++++++++++++
>> 1 file changed, 73 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>> new file mode 100644
>> index 0000000..077b9ad
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>> @@ -0,0 +1,73 @@
>> +Rockchip RV1108 RGB interface
>> +================================
>> +
>> +Required properties:
>> +- compatible: matching the soc type:
>> + - "rockchip,px30-rgb";
>> + - "rockchip,rv1108-rgb";
>
> This doesn't look right? What (and how) is getting programmed here
> because you don't have any register interface.
>
This is register for DRM encoder and connecter or bridge for some RGB
convert chips driver.
so far we don't have any register for rgb interface, but it's most
probable need to config some register for rgb interface in feauture for
rockchip platform.

>> +
>> +Optional properties:
>> +- pinctrl-names: should be a "lcdc" entry or a "default" entry.
>> +- pinctrl-0: pin control group to be used for this interface.
>> +
>> +The rgb has two video ports described by:
>> + Documentation/devicetree/bindings/media/video-interfaces.txt
>> +Their connections are modeled using the OF graph bindings specified in
>> + Documentation/devicetree/bindings/graph.txt.
>> +
>> +- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop
>
> So there is a mux for these inputs and they are switched with pinctrl?
>
connetced can connect to vopb/vopl/vop which is same with other
connenter like edp/dsi/lvds, there is a sample for edp
at:Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
> Just put the pinctrl nodes of the sources and enable whichever one is
> active.
>
Do you think i need add pinctrl nodes here? Or am I wrong?
> Rob
>
>
>

\
 
 \ /
  Last update: 2018-07-04 14:10    [W:0.068 / U:3.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site