lkml.org 
[lkml]   [2018]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH 5/6] arm: enable RapidIO menu in Kconfig
On Tue, Jul 31, 2018 at 10:29:53AM -0400, Alexei Colin wrote:
> Platforms with a PCI bus will be offered the RapidIO menu since they may
> be want support for a RapidIO PCI device. Platforms without a PCI bus
> that might include a RapidIO IP block will need to "select HAS_RAPIDIO"
> in the platform-/machine-specific "config ARCH_*" Kconfig entry.
>
> Tested that kernel builds for ARM with the RapidIO subsystem and switch
> drivers enabled.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: John Paul Walters <jwalters@isi.edu>
> Cc: linux-kernel@vger.kernel.org
> Cc: x86@kernel.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-mips@linux-mips.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Alexei Colin <acolin@isi.edu>
> ---
> arch/arm/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index afe350e5e3d9..602a61324890 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1278,6 +1278,8 @@ config PCI_HOST_ITE8152
>
> source "drivers/pci/Kconfig"
>
> +source "drivers/rapidio/Kconfig"
> +
> source "drivers/pcmcia/Kconfig"

Why not place the new Kconfig file after pcmcia? That way, it is in
a consistent position wrt architectures such as powerpc, and it is
also in alphabetical order.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up

\
 
 \ /
  Last update: 2018-07-31 17:38    [W:0.124 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site