lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/12] drm/dp: add pixel encoding and colorimetry format indicator field in MISC1
Date
From: Quentin Schulz <quentin.schulz@bootlin.com>

If DP_TEST_COLOR_FORMAT_RAW_Y_ONLY is set, if MISC0 color format is
DP_COLOR_FORMAT_RGB and all other bits are 0, then color format is
actually Y-Only.

If DP_TEST_COLOR_FORMAT_RAW_Y_ONLY is set, if MISC0 color format is
DP_COLOR_FORMAT_YCbCr422, DP_TEST_DYNAMIC_RANGE_CEA is not set and
chosen ITU is 601, then color format is actually RAW.

If DP_TEST_VSC_SDP is set, then DP_TEST_COLOR_FORMAT_RAW_Y_ONLY,
DP_TEST_COLOR_FORMAT, DP_TEST_DYNAMIC_RANGE_CEA,
DP_TEST_YCBCR_COEFFICIENTS and DP_TEST_BIT_DEPTH are ignored and we
should use VSC SDP for setting the colorimetry. This is used for Y420.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Damian Kos <dkos@cadence.com>
---
include/drm/drm_dp_helper.h | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index accefbb..22f6c3e 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -609,6 +609,8 @@
#define DP_TEST_MISC1 0x233
# define DP_TEST_REFRESH_DENOMINATOR (1 << 0)
# define DP_TEST_INTERLACED (1 << 1)
+# define DP_TEST_VSC_SDP (1 << 6) /* 1.3+ */
+# define DP_TEST_COLOR_FORMAT_RAW_Y_ONLY (1 << 7)

#define DP_TEST_REFRESH_RATE_NUMERATOR 0x234

--
1.7.1
\
 
 \ /
  Last update: 2018-07-03 12:04    [W:2.065 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site