[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/2] Input: Add Cypress Gen5 Touchscreen driver

Here is a V6 series to add the driver of the touchscreen Cypress,
TrueTouch Generation 5.
Based on v4.18-rc3.

This patch series has already been posted in several iterations:
- v1: Sent on 2017/05/29
- v2: Sent on 2017/08/18
- v3: Sent on 2017/09/27
- v4: Sent on 2017/12/01
- v5: Sent on 2017/12/20

I did not have any comments the last 4 versions.
And no reviews on my v5 during 6 months. Could I have any updates
or feedback on my series to know why it is not merged (to be able to
correct what is wrong)?

Changes since v5:
- Rebased on v4.17-rc3
- Use SPDX header
- Called "touchscreen_report_pos" function to perform some
DT properties on position (such as X/Y swapping)
- Called "__set_bit" for ABS_X, ABS_Y and BTN_TOUCH to be able
to use "ts_lib" otherwise, it returns an error:
tslib: Selected device is not a touchscreen (must support
ABS and KEY event types)
Changes since v4:
- Fixed kbuild errors about enum hid_cmd_state and .owner
Changes since v3:
- Rebased on last input's branch
- Changed the CRC table to use crc_itu_t_table instead of
crc_ccitt_false_table which is not merged.
- Added selection of CRC_ITU_T on KConfig
Changes since v2:
- Removed pinctrl in dt-binding example which is uncessecary.
- Added Acked-by and Reviewed-by received.
Changes since v1:
- Updated the driver according to reviews. Most important modifications:
removed unnecessary mutex, updated dev_err output, handled return cases
in a better way, created a HID_ENUM, removed magic value, used an
existing CRC table and used "linux-keycodes" instead of sub-nodes.
- Updated the dt-bindings to use linux-keycodes and removed properties'
description that comes from touchscreen's binding.

Patch 01: Add the basis of the driver for Cypress Gen5 Touchscreen.
Patch 02: Add the binding documentation for this driver.

Thank you,

Best regards,

Mylène Josserand (2):
Input: Add driver for Cypress Generation 5 touchscreen
dt-bindings: input: Add documentation for cyttsp5

.../bindings/input/touchscreen/cypress,cyttsp5.txt | 39 +
drivers/input/touchscreen/Kconfig | 16 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp5.c | 1110 ++++++++++++++++++++
4 files changed, 1166 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,cyttsp5.txt
create mode 100644 drivers/input/touchscreen/cyttsp5.c


 \ /
  Last update: 2018-07-03 11:47    [W:0.066 / U:3.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site