lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] clk: meson: add a sub EMMC clock controller support
On Tue, 3 Jul 2018 14:57:13 +0000
Yixun Lan <yixun.lan@amlogic.com> wrote:

> This driver will add a EMMC clock controller driver support.
> The original idea about adding a clock controller is during the
> discussion in the NAND driver mainline effort[1].
>
> I've tested this in the S400 board (AXG platform) by using NAND driver.
>
> [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13

This is much better :-).

>
> Yixun Lan (3):
> clk: meson: add DT documentation for emmc clock controller
> clk: meson: add sub EMMC clock dt-bindings IDs
> clk: meson: add sub EMMC clock controller driver
>
> .../bindings/clock/amlogic,emmc-clkc.txt | 45 ++++++
> drivers/clk/meson/Kconfig | 9 ++
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/emmc-clkc.c | 136 ++++++++++++++++++
> include/dt-bindings/clock/emmc-clkc.h | 14 ++
> 5 files changed, 205 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
> create mode 100644 drivers/clk/meson/emmc-clkc.c
> create mode 100644 include/dt-bindings/clock/emmc-clkc.h
>

\
 
 \ /
  Last update: 2018-07-03 09:17    [W:0.246 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site