lkml.org 
[lkml]   [2018]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] iio: adc: xilinx: Move request_irq before enabling interrupts
On Mon, 23 Jul 2018 20:32:03 +0530
Manish Narani <manish.narani@xilinx.com> wrote:

> Enabling the Interrupts before registering the irq handler is a bad
> idea. This patch corrects the same for XADC driver.
>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> ---
> drivers/iio/adc/xilinx-xadc-core.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
> index 44a2519..3f6be5a 100644
> --- a/drivers/iio/adc/xilinx-xadc-core.c
> +++ b/drivers/iio/adc/xilinx-xadc-core.c
> @@ -1226,15 +1226,15 @@ static int xadc_probe(struct platform_device *pdev)
> if (ret)
> goto err_free_samplerate_trigger;
>
> - ret = xadc->ops->setup(pdev, indio_dev, xadc->irq);
> - if (ret)
> - goto err_clk_disable_unprepare;
> -
> ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
> dev_name(&pdev->dev), indio_dev);
> if (ret)
> goto err_clk_disable_unprepare;
>
> + ret = xadc->ops->setup(pdev, indio_dev, xadc->irq);
> + if (ret)
> + goto err_free_irq;
> +
> for (i = 0; i < 16; i++)
> xadc_read_adc_reg(xadc, XADC_REG_THRESHOLD(i),
> &xadc->threshold[i]);

\
 
 \ /
  Last update: 2018-07-29 14:31    [W:0.071 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site