lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] dt-bindings: net: Add clock handle to Broadcom iProc mdio mux
Date
Add clock phandle, of the core clock driving the mdio block, as an
optional property to the Broadcom iProc mdio mux block.

The clock, when specified, will be used to setup the rate adjust registers
in the mdio to derrive the mdio's operating frequency.

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
---
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
index dc8aa68..b58843f 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
@@ -13,6 +13,9 @@ MDIO multiplexer node:
Every non-ethernet PHY requires a compatible so that it could be probed based
on this compatible string.

+Optional properties:
+- clocks: phandle of the core clock which drives the mdio block.
+
Additional information regarding generic multiplexer properties can be found
at- Documentation/devicetree/bindings/net/mdio-mux.txt

--
1.9.1
\
 
 \ /
  Last update: 2018-07-26 20:37    [W:0.159 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site