lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] MIPS: mscc: ocelot: add MIIM1 bus
Hi Quentin,

On Wed, Jul 25, 2018 at 02:22:41PM +0200, Quentin Schulz wrote:
> There is an additional MIIM (MDIO) bus in this SoC so let's declare it
> in the dtsi.
>
> This bus requires GPIO 14 and 15 pins that need to be muxed. There is no
> support for internal PHY reset on this bus on the contrary of MIIM0 so
> there is only one register address space and not two.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
> ---
> arch/mips/boot/dts/mscc/ocelot.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)

Thanks - applied to mips-next for 4.19.

Paul

\
 
 \ /
  Last update: 2018-07-26 19:45    [W:0.029 / U:1.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site