lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] dt-bindings: iio: adc: add bindings for mcp3911
Hi Jonathan,

On Sun, Jul 22, 2018 at 09:11:11AM +0100, Jonathan Cameron wrote:
> On Sat, 21 Jul 2018 21:59:22 +0200
> Marcus Folkesson <marcus.folkesson@gmail.com> wrote:
>

[snip]

> > +Optional properties:
> > + - device-addr: Device address when multiple MCP3911 chips are present on the
> > + same SPI bus. Valid values are 0-3. Defaults to 0.
> > + - external-clock: Use external clock instead of crystal oscillator.
> As mentioned, in the code, can we use the standard fixed clock bindings here.
> We don't actually care what the value is, but it might be nice to be able to
> power down the clock if we are suspending or something..
>
> > + - external-vref: Use external voltage reference
> > + - vref-supply: Phandle to the external reference voltage supply. (only valid in combination with `external-vref`)
>
> Just use the optional regulator stuff and get rid of the bool.
>
> > + - ch0-width: width for channel0. Valid widths are 16 and 24bits.
> > + - ch1-width: width for channel1. Valid widths are 16 and 24bits.
>
> As I asked in the code, are these a function of the wiring etc or are
> they something we should really be leaving up to userspace (with a sensible
> default).
>


I agree with all of your comments.
I will remove the channel width properties and fix the regulator/clock
bindings.

Thanks,

Best regards
Marcus Folkesson
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-23 10:36    [W:0.041 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site