lkml.org 
[lkml]   [2018]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 3/3] PCI: Mask and unmask hotplug interrupts during reset
From
Date
On 7/20/2018 7:58 PM, Sinan Kaya wrote:
> We need to figure out how to gracefully return inside hotplug driver
> if link down happened and there is an error pending.

How about adding the following into the hotplug ISR?

1. check if firmware first is disabled
2. check if there is a fatal error pending in the device_status register
of the PCI Express capability on the root port.
3. bail out from hotplug routine if this is the case.
4. otherwise, existing behavior.

\
 
 \ /
  Last update: 2018-07-21 08:08    [W:0.082 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site