lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 6/8] NTB: perf: Fix support for hardware that doesn't have port numbers
Legacy drivers do not have port numbers (but is reliably only two ports)
and was broken by the recent commit that added mult-port support to
ntb_perf. This is especially important to support the cross link
topology which is perfectly symmetric and cannot assign unique port
numbers easily.

Hardware that returns zero for both the local port and the peer should
just always use gidx=0 for the only peer.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
---
drivers/ntb/test/ntb_perf.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index fe27412ffe91..6285cb8515ac 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -1417,6 +1417,16 @@ static int perf_init_peers(struct perf_ctx *perf)
if (perf->gidx == -1)
perf->gidx = pidx;

+ /*
+ * Hardware with only two ports may not have unique port
+ * numbers. In this case, the gidxs should all be zero.
+ */
+ if (perf->pcnt == 1 && ntb_port_number(perf->ntb) == 0 &&
+ ntb_peer_port_number(perf->ntb, 0) == 0) {
+ perf->gidx = 0;
+ perf->peers[0].gidx = 0;
+ }
+
for (pidx = 0; pidx < perf->pcnt; pidx++) {
ret = perf_setup_peer_mw(&perf->peers[pidx]);
if (ret)
--
2.11.0
\
 
 \ /
  Last update: 2018-07-20 20:01    [W:0.136 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site