lkml.org 
[lkml]   [2018]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 5/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
On Wed, Jul 18, 2018 at 5:39 AM, Matthias Kaehlcke <mka@chromium.org> wrote:
> On Thu, Jul 12, 2018 at 02:09:06PM +0530, Amit Kucheria wrote:
>> We want to create common code for v2 of the TSENS IP block that is used in
>> a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
>> most of the common functionality start with a common get_temp() function.
>>
>> It is also necessary to split out the memory regions for the TM and SROT
>> register banks because their offsets are not constant across SoC families.
>>
>> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Tested-by: Matthias Kaehlcke <mka@chromium.org>
>> ---
>> .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++-----
>> 1 file changed, 25 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>> index 06195e8..b5312a8 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>> @@ -1,18 +1,28 @@
>> * QCOM SoC Temperature Sensor (TSENS)
>>
>> Required properties:
>> -- compatible :
>> - - "qcom,msm8916-tsens" : For 8916 Family of SoCs
>> - - "qcom,msm8974-tsens" : For 8974 Family of SoCs
>> - - "qcom,msm8996-tsens" : For 8996 Family of SoCs
>> +- compatible:
>> + Must be one of the following:
>> + - "qcom,msm8916-tsens" (MSM8916)
>> + - "qcom,msm8974-tsens" (MSM8974)
>> + - "qcom,msm8996-tsens" (MSM8996)
>> + - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
>> + - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
>> + The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
>> + with version 2 of the TSENS IP. MSM8996 is the only exception beacause the
>
> s/beacause/because/
>
>> + generic property did not exist when support was added.
>> +
>> +- reg: Address range of the thermal registers.
>> + New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
>> + register spaces separately, with order being TM before SROT.
>> + See Example 2, below.
>>
>> -- reg: Address range of the thermal registers
>> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
>> - #qcom,sensors: Number of sensors in tsens block
>> - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>> nvmem cells
>>
>> -Example:
>> +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
>
> s/propoerty/property/
>
>> tsens: thermal-sensor@900000 {
>> compatible = "qcom,msm8916-tsens";
>> reg = <0x4a8000 0x2000>;
>> @@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
>> nvmem-cell-names = "caldata", "calsel";
>> #thermal-sensor-cells = <1>;
>> };
>> +
>> +Example 2 (for any platform containing v2 of the TSENS IP):
>> +tsens0: thermal-sensor@c263000 {
>> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
>> + reg = <0xc263000 0x1ff>, /* TM */
>> + <0xc222000 0x1ff>; /* SROT */
>> + #qcom,sensors = <13>;
>> + #thermal-sensor-cells = <1>;
>> + };
>
> Besides the typos:
>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>
> Oh, and you also might want to reorder the patches as suggested by
> Doug on v6 to put the changes in the binding before the code changes.

Ahh, sorry I missed that reordering.

\
 
 \ /
  Last update: 2018-07-18 08:44    [W:0.048 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site