lkml.org 
[lkml]   [2018]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/5] thermal: exynos: enable core tmu clk on exynos platform
On 17 July 2018 at 22:23, Anand Moon <linux.amoon@gmail.com> wrote:
> Hi Krzysztof
>
> On 17 July 2018 at 17:50, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> Hi Anand,
>>
>> Thanks for patch.
>>
>> On 17 July 2018 at 12:12, Anand Moon <linux.amoon@gmail.com> wrote:
>>> clk_summary do not show tmu_apbif clk enable, so replace
>>> the clk_prepare with clk_prepare_enables to enable tmu clk.
>>
>> This is not valid reason to do a change. What is clk_summary does not
>> really matter. Your change has negative impact on power consumption as
>> the clock stays enabled all the time. This is not what we want... so
>> please explain it more - why you need the clock to be enabled all the
>> time? What is broken (clk_summary is not broken in this case)?
>>
>
> Opps I could not explain some more in my commit message.
>
> Actually TMU sensor for Exynos process are controlled by so external clk
>
> Exynos4412 have VDD18_TS sensor which controls the CLK_SENSE tmu.
> Exynos5422 have VDD18_TS01 / VDD18_TS23 / VDD18_TS4 sensor which
> control the CLK_SENSE tmu.
>
> So as per my understanding tmu is clk driver which control the flow PMIC.
>
> clk_prepare_enable combine clk_prepare and clk_enable
> and clk_disable_unprepare combine clk_disable and clk_unprepare.
>
> most of the driver prefer clk_prepare_enable and clk_disable_unprepare.
>
> clk_summary is just a reference looking point where we could check the
> clk is enable/disable.
>
> what is broken ?
> I still few more parameter need to tuned to configure the tmu driver.

I am sorry but I am still unable to see what is broken and what are
you trying to fix. I asked what is broken and you replied that there
is a sensor, there is a clock, drivers use clk_prepare_enable and some
more parameter need to be tuned... None of these are answers to
question - what is broken. How can I reproduce the problem?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2018-07-18 08:19    [W:1.785 / U:2.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site