lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/6] PCI/AER: Take severity mask into account while clearing error bits
Hi Oza,

Thanks for doing this!

On Fri, Jun 22, 2018 at 05:58:09AM -0400, Oza Pawandeep wrote:
> pci_cleanup_aer_uncorrect_error_status() is called by different slot_reset
> callbacks in case of ERR_NONFATAL.

IIRC, the current strategy is:

ERR_COR: log only
ERR_NONFATAL: call driver callbacks (pci_error_handlers)
ERR_FATAL: remove device and re-enumerate

So these slot_reset callbacks are only used for ERR_NONFATAL, which
are all uncorrectable errors, of course.

This patch makes it so that when the slot_reset callbacks call
pci_cleanup_aer_uncorrect_error_status(), we only clear the
bits set by ERR_NONFATAL events (this is determined by
PCI_ERR_UNCOR_SEVER).

That makes good sense to me. All these status bits are RW1CS, so they
will be preserved across a reset but will be cleared when we
re-enumerate, in this path:

pci_init_capabilities
pci_aer_init
pci_cleanup_aer_error_status_regs
# clear all PCI_ERR_UNCOR_STATUS and PCI_ERR_COR_STATUS bits

> AER uncorrectable error status should take severity into account in order
> to clear the bits, so that ERR_NONFATAL path does not clear the bit which
> are marked with severity fatal.

Two comments:

1) Can you split this into two patches, one that changes
pci_cleanup_aer_uncorrect_error_status() so it looks like the error
clearing code in aer_error_resume(), and a second that factors out the
duplicate code?

2) Maybe use "sev" or "sever" instead of "mask" for the local
variable, since there is also a separate PCI_ERR_UNCOR_MASK register,
which is not involved here.

3) The "pci_cleanup_aer_uncorrect_error_status()" name no longer
really describes what this does. Something like
"pci_aer_clear_nonfatal_status()" would be more descriptive. But I
see you have a subsequent patch (which I haven't looked at yet) that
is related to this.

4) I don't think the driver slot_reset callbacks should be responsible
for clearing these AER status bits. Can we clear them somewhere in
the pcie_do_nonfatal_recovery() path and remove these calls from the
drivers?

5) In principle, we should only read PCI_ERR_UNCOR_STATUS *once* per
device when handling an error. We currently read it three times:

aer_isr
aer_isr_one_error
find_source_device
find_device_iter
is_error_source
read PCI_ERR_UNCOR_STATUS # 1
aer_process_err_devices
get_device_error_info(e_info->dev[i])
read PCI_ERR_UNCOR_STATUS # 2
handle_error_source
pcie_do_nonfatal_recovery
...
report_slot_reset
driver->err_handler->slot_reset
pci_cleanup_aer_uncorrect_error_status
read PCI_ERR_UNCOR_STATUS # 3

OK, that was more than two comments :)

> Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index a2e8838..d6cb1f0 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -360,13 +360,16 @@ EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
> int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
> {
> int pos;
> - u32 status;
> + u32 status, mask;
>
> pos = dev->aer_cap;
> if (!pos)
> return -EIO;
>
> + /* Clean AER Root Error Status */

s/Clean/Clear/ (I see you copied this from aer_error_resume(), and maybe
the second patch could remove or update that comment, too)

> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
> + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
> + status &= ~mask; /* Clear corresponding nonfatal bits */
> if (status)
> pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
>
> @@ -1336,8 +1339,6 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> */
> static void aer_error_resume(struct pci_dev *dev)
> {
> - int pos;
> - u32 status, mask;
> u16 reg16;
>
> /* Clean up Root device status */
> @@ -1345,11 +1346,7 @@ static void aer_error_resume(struct pci_dev *dev)
> pcie_capability_write_word(dev, PCI_EXP_DEVSTA, reg16);
>
> /* Clean AER Root Error Status */
> - pos = dev->aer_cap;
> - pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
> - pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
> - status &= ~mask; /* Clear corresponding nonfatal bits */
> - pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
> + pci_cleanup_aer_uncorrect_error_status(dev);
> }
>
> static struct pcie_port_service_driver aerdriver = {
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-07-17 21:04    [W:0.099 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site