lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] drm/sun4i: sun8i: Avoid clearing blending order at each atomic commit
On Tue, Jul 17, 2018 at 02:25:22PM +0200, Paul Kocialkowski wrote:
> Blending order is set based on the z position of each DRM plane. The
> blending order register is currently cleared at each atomic DRM commit,
> with the intent that each committed plane will set the appropriate
> bits (based on its z-pos) when enabling the plane.
>
> However, it sometimes happens that a particular plane is left unchanged
> by an atomic commit and thus will not be configured again. In that
> scenario, blending order is cleared and only the bits relevant for the
> planes affected by the commit are set. This leaves the planes that did
> not change without their blending order set in the register, leading
> to that plane not being displayed.
>
> Instead of clearing the blending order register at every atomic commit,
> this change moves the register's initial clear at bind time and only
> clears the bits for a specific plane when disabling it or changing its
> zpos.
>
> This way, planes that are left untouched by a DRM atomic commit are
> no longer disabled.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-17 17:34    [W:0.042 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site