lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
On Tue, Jul 17, 2018 at 02:08:14PM -0700, Matthias Kaehlcke wrote:
> This adds the spmi-temp-alarm node to pm8998 based on the examples in the
> bindings.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

I should have added:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

> ---
> Changes in v4:
> - none
>
> Changes in v3:
> - changed node name from 'qcom,temp-alarm@2400' to 'temp-alarm@2400'
> - removed controller register length value from 'reg'
>
> Changes in v2:
> - none
> ---
> arch/arm64/boot/dts/qcom/pm8998.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 92bed1e7d4bb..7eea94701b23 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -11,6 +11,13 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pm8998_temp: temp-alarm@2400 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> pm8998_gpio: gpios@c000 {
> compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
> reg = <0xc000>;

\
 
 \ /
  Last update: 2018-07-17 23:12    [W:0.059 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site