lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: lspci: Display path to device


On 17/07/18 02:39 PM, Matthew Wilcox wrote:
> On Tue, Jul 17, 2018 at 11:02:00AM -0600, Logan Gunthorpe wrote:
>> The second patch expands the new helper to optionally take a path of
>> PCI devfns. This is to address Alex's renumbering concern when using
>> simple bus-devfns. The implementation is essentially how he described it and
>> similar to the Intel VT-d spec (Section 8.3.1).
>
> I don't like telling the user to grovel around lspci -t by hand. It's
> not many lines of code to add a new -P option to lspci to show the path
> to each device instead of bus:dev.fn

Thanks, this looks great! I also found parsing the lspci -t output
cumbersome.

I've also got patches pending for switchtec-user[1] that help users find
the path of downstream ports for Microsemi switches. (An example is
shown below). As the ACS feature is primarily for PCI switch users, this
should help a good segment of people. The lspci patches should cover a
lot more people though.

Logan

sudo switchtec status /dev/switchtec0 -v
Partition 0: (LOCAL)
Logical Port ID 0 (USP):
Phys Port ID: 32 (Stack 4, Port 0)
Bus-Dev-Func: 0000:02:00.0
Bus-Dev-Func Path: 0000:00:02:0/00.0
Status: UP
LTSSM: L0
Max-Width: x16
Neg Width: x16
Rate: Gen3 - 8 GT/s 15.76 GB/s
Out Bytes: 70.3 GB
In Bytes: 70.8 GB
Logical Port ID 1 (DSP):
Phys Port ID: 8 (Stack 1, Port 0)
Bus-Dev-Func: 0000:03:00.0
Bus-Dev-Func Path: 0000:00:02:0/00.0/00.0
Status: UP
LTSSM: L0
Max-Width: x8
Neg Width: x8
Rate: Gen3 - 8 GT/s 7.88 GB/s
Out Bytes: 12.2 MB
In Bytes: 441 MB
ACS: SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
Device: 10b5:8724 (0000:04:00.0)
0000:05
Logical Port ID 2 (DSP):
Phys Port ID: 12 (Stack 1, Port 4)
Bus-Dev-Func: 0000:03:01.0
Bus-Dev-Func Path: 0000:00:02:0/00.0/01.0
Status: UP
LTSSM: L0
Max-Width: x8
Neg Width: x8
Rate: Gen3 - 8 GT/s 7.88 GB/s
Out Bytes: 1.65 MB
In Bytes: 107 MB
ACS: SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
Device: 11f8:f117 (0000:0b:00.0)
nvme4




[1] https://github.com/Microsemi/switchtec-user/pull/25

\
 
 \ /
  Last update: 2018-07-17 22:52    [W:0.128 / U:3.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site