lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/2] ARM: dts: am3355: add support for the Sancloud Beaglebone Enhanced
Date
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

* Gigabit capable PHY
* Extra USB hub, optional i2c control
* lps3331ap barometer connected over i2c
* MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
* 1GiB DDR3 RAM
* RTL8723 Wifi/Bluetooth connected over USB

This series adds the Sancloud vendor prefix as well as the actual dts.

v6: Generic nodename for usbhub, was missed in v5
v5: Generic nodenames, lowercase hex numbers
v4: Add Robs Acked-by for 1/2
v3: Drop 1GHz Opp tweak
v2: * Add missing #include <dt-bindings/interrupt-controller/irq.h>
* Fix barometer compatible string
v1: Initial submission, not the dts actually tested :/

Also double checked if the kbuild error has been fixed:

koen@beast:/build/pkg/linux-torvalds$ git describe
v5.18-rc4-71-gd69088d
koen@beast:/build/pkg/linux-torvalds$ ARCH=arm CROSS_COMPILE=arm-angstrom-linux-gnueabi- make am335x-sancloud-bbe.dtb
DTC arch/arm/boot/dts/am335x-sancloud-bbe.dtb
koen@beast:/build/pkg/linux-torvalds$

Same successful result on tmlind/for-next (which has v2 already) and robh/for-next

Koen Kooi (2):
dt-bindings: Add vendor prefix for Sancloud
ARM: dts: am335x: add am335x-sancloud-bbe board support

.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-sancloud-bbe.dts | 146 +++++++++++++++++++++
3 files changed, 148 insertions(+)
create mode 100644 arch/arm/boot/dts/am335x-sancloud-bbe.dts

--
2.0.1

\
 
 \ /
  Last update: 2018-07-17 08:53    [W:0.905 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site