lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/2] ARM: dts: am335x: add am335x-sancloud-bbe board support
From
Date


> Op 17 jul. 2018, om 08:36 heeft Tony Lindgren <tony@atomide.com> het volgende geschreven:
>
> * Koen Kooi <koen@dominion.thruhere.net> [180717 06:28]:
>> +&i2c0 {
>> + lps331ap: barometer@5c {
>> + compatible = "st,lps331ap-press";
>> + st,drdy-int-pin = <1>;
>> + reg = <0x5c>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <26 IRQ_TYPE_EDGE_RISING>;
>> + };
>> +
>> + mpu6050: accelerometer@68 {
>> + compatible = "invensense,mpu6050";
>> + reg = <0x68>;
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <2 IRQ_TYPE_EDGE_RISING>;
>> + orientation = <0xff 0 0 0 1 0 0 0 0xff>;
>> + };
>> +
>> + usb2512b@2c {
>> + compatible = "microchip,usb2512b";
>> + reg = <0x2c>;
>> + reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
>> + /* wifi on port 4 */
>> + };
>> +};
>
> Thanks for updating it, should the last one be usb-hub@2c?

Yes, it should be. Never update patches halfway through your first morning coffee :) V6 coming up!

regards,

Koen
\
 
 \ /
  Last update: 2018-07-17 08:53    [W:0.033 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site