lkml.org 
[lkml]   [2018]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 2/5] mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
Date
O2 SD Host HS200 mode clock frequency current is 208MHz, should be changed
to 200MHz to meet specification.

Signed-off-by: ernest.zhang <ernest.zhang@bayhubtech.com>
---
Change in V7:
Change HS200 mode clock frequency from 208MHz to 200MHz to meet
Specification.

Change in V1~V6:
N/A
---
drivers/mmc/host/sdhci-pci-o2micro.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index ba59db6a126c..94cf3cd75dd3 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -311,7 +311,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)

/* Check Whether subId is 0x11 or 0x12 */
if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
- scratch_32 = 0x2c280000;
+ scratch_32 = 0x25100000;

/* Set Base Clock to 208MZ */
o2_pci_set_baseclk(chip, scratch_32);
@@ -406,7 +406,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
O2_SD_PLL_SETTING, scratch_32);
} else {
scratch_32 &= 0x0000FFFF;
- scratch_32 |= 0x2c280000;
+ scratch_32 |= 0x25100000;

pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
--
2.17.1
\
 
 \ /
  Last update: 2018-07-16 08:29    [W:0.122 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site