lkml.org 
[lkml]   [2018]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] ARM: dts: pxa: add mioa701 board description
Date
Rob Herring <robh+dt@kernel.org> writes:

Hi Rob,

>> + /* compatible = "mitac,mioa701"; */
>> + compatible = "marvell,pxa270";
>
> Why the comment?
Leftover, I'll remove it.

>> + pstore_region:region@0xa2000000 {
>
> Drop the 0x
Done.

>> + compatible = "linux,contiguous-memory-region";
>> + reg = <0xa2000000 1048576>;
>
> Use hex for the size.
Ok.

>> + ffuart: uart@40100000 {
>
> Should be "serial@...". You'll have to fix in the base dtsi.
Ok for all of these.
>> + pxai2c1: i2c@40301680 {
>> + mrvl,i2c-fast-mode;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c_default>;
>> + status = "okay";
>> +
>> + mt9m111: camera@5d {
>> + compatible = "micron,mt9m111";
>> + reg = <0x5d>;
>> + gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
>> +
>> + remote = <&pxa_camera>;
>
> Not needed with the graph:
I don't understand that, do you mean the port node is not needed ?

>
>> + port {
>> + mt9m111_1: endpoint {
>> + bus-width = <8>;
>> + remote-endpoint = <&pxa_camera>;
>> + };
>> + };
>> + };
>> + };
>> + gpio-keys {
>> + compatible = "gpio-keys";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + autorepeat;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_gpiokeys_default>;
>> + status = "okay";
>
> Don't need status here? It shouldn't be defined in the base dtsi.
Heuh what ? The status is just above, and gpio-keys is not defined in any dtsi.

>> +
>> + button@0 {
>
> If you have unit-address there should also be a reg property. Just
> drop and name the node 'power' or 'power-button'. And similarly for
> the rest.
Ok.

>> +
>> + regulators {
>> + compatible = "simple-bus";
>
> Drop this and move children to the top level. This is not an mmio bus.
Ok.

>> + docg3: flash@0 {
>
> This probably should be a child of the bus controller.
Most certainly yes.

>
>> + compatible = "m-systems,diskonchip-g3";
>> + reg = <0x0 0x2000>;
>> + };
>> +
>> + panel {
>> + compatible = "toshiba,ltm0305a776";
>> + lcd-type = "color-tft";
>
> This should be implied by the compatible.
Mmm no. Actually, this is used by the framebuffer controller, ie. pxafb to set
it up. And I don't think adding a list of panel compatibles in pxafb is a good
idea.
The corresponding code is in : drivers/video/fbdev/pxafb.c, see
"static const char * const lcd_types[]".

>> + display-timings {
>> + native-mode = <&timing0>;
>
> We generally imply this from the compatible (i.e. use simple-panel).
But you suppose there is an actual driver for the panel, right ? But there is
none.

> Could use another level of indentation.
Sure.

>> + ac_charger: charger@1 {
>
> Drop the unit-address.
Ok.

Thanks for the review.

--
Robert
\
 
 \ /
  Last update: 2018-07-15 22:07    [W:0.058 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site