lkml.org 
[lkml]   [2018]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] rtc: jz4740: Add support for the JZ4725B, JZ4760, JZ4770
On 14/07/2018 15:25:33+0200, Paul Cercueil wrote:
> Hi Alexandre,
>
> Le sam. 14 juil. 2018 à 15:19, Alexandre Belloni
> <alexandre.belloni@bootlin.com> a écrit :
> > Hello,
> >
> > On 13/07/2018 17:14:24+0200, Paul Cercueil wrote:
> > > The RTC in the JZ4725B works just like the one in the JZ4740.
> > >
> > > The RTC in the JZ4760 and JZ4770 work just like the one in the
> > > JZ4780.
> > >
> > > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> > > ---
> > > Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 3
> > > +++
> > > drivers/rtc/rtc-jz4740.c | 11
> > > ++++++++++-
> > > 2 files changed, 13 insertions(+), 1 deletion(-)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> > > b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> > > index 41c7ae18fd7b..a9e821de84f2 100644
> > > --- a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> > > +++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
> > > @@ -4,6 +4,9 @@ Required properties:
> > >
> > > - compatible: One of:
> > > - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
> > > + - "ingenic,jz4725b-rtc" - for use with the JZ4725B SoC
> > > + - "ingenic,jz4760-rtc" - for use with the JZ4760 SoC
> > > + - "ingenic,jz4770-rtc" - for use with the JZ4770 SoC
> > > - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
> > > - reg: Address range of rtc register set
> > > - interrupts: IRQ number for the alarm interrupt
> > > diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
> > > index d0a891777f44..1c867e3a0ea5 100644
> > > --- a/drivers/rtc/rtc-jz4740.c
> > > +++ b/drivers/rtc/rtc-jz4740.c
> > > @@ -54,6 +54,9 @@
> > >
> > > enum jz4740_rtc_type {
> > > ID_JZ4740,
> > > + ID_JZ4725B,
> > > + ID_JZ4760,
> > > + ID_JZ4770,
> >
> > I wouldn't introduce those ids unless there are handling differences at
> > some point.
>
> Well there are handling differences, see below.
>
> > > ID_JZ4780,
> > > };
> > >
> > > @@ -114,7 +117,7 @@ static inline int jz4740_rtc_reg_write(struct
> > > jz4740_rtc *rtc, size_t reg,
> > > {
> > > int ret = 0;
> > >
> > > - if (rtc->type >= ID_JZ4780)
> > > + if (rtc->type >= ID_JZ4760)
> >
> > This would avoid that change (and the test would preferably be
> > (rtc->type == ID_JZ4780))
>
> That branch should be taken if the SoC is JZ4760, JZ4770 or JZ4780.
> It should not be taken if the SoC is JZ4740 or JZ4725B.

Sure but you can achieve that with only 2 ids...

>
> > > ret = jz4780_rtc_enable_write(rtc);
> > > if (ret == 0)
> > > ret = jz4740_rtc_wait_write_ready(rtc);
> > > @@ -300,6 +303,9 @@ static void jz4740_rtc_power_off(void)
> > >
> > > static const struct of_device_id jz4740_rtc_of_match[] = {
> > > { .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
> > > + { .compatible = "ingenic,jz4725b-rtc", .data = (void *)ID_JZ4725B
> > > },
> > > + { .compatible = "ingenic,jz4760-rtc", .data = (void *)ID_JZ4760 },
> > > + { .compatible = "ingenic,jz4770-rtc", .data = (void *)ID_JZ4770 },

By doing the correct mapping here e.g:

{ .compatible = "ingenic,jz4725b-rtc", .data = (void *)ID_JZ4740 },

> > > { .compatible = "ingenic,jz4780-rtc", .data = (void *)ID_JZ4780 },
> > > {},
> > > };
> > > @@ -428,6 +434,9 @@ static const struct dev_pm_ops jz4740_pm_ops = {
> > >
> > > static const struct platform_device_id jz4740_rtc_ids[] = {
> > > { "jz4740-rtc", ID_JZ4740 },
> > > + { "jz4725b-rtc", ID_JZ4725B },
> > > + { "jz4760-rtc", ID_JZ4760 },
> > > + { "jz4770-rtc", ID_JZ4770 },

And here

> > > { "jz4780-rtc", ID_JZ4780 },
> > > {}
> > > };
> > > --
> > > 2.11.0
> > >
> >
> > --
> > Alexandre Belloni, Bootlin (formerly Free Electrons)
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
>

--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
\
 
 \ /
  Last update: 2018-07-15 22:07    [W:0.050 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site