lkml.org 
[lkml]   [2018]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 0/6] Driver for at91 usart in spi mode
On Wed, 11 Jul 2018, Nicolas Ferre wrote:

> On 25/06/2018 at 19:22, Radu Pirea wrote:
> > Hello,
> >
> > This is the second version of driver. I added a mfd driver which by
> > default probes atmel_serial driver and if in dt is specified to probe
> > the spi driver, then the spi-at91-usart driver will be probed. The
> > compatible for atmel_serial is now the compatible for at91-usart mfd
> > driver and compatilbe for atmel_serial driver was changed in order to
> > keep the bindings for serial as they are.
> >
> > Changes in v10:
> > -fixed kbuild test robot warning
> >
> > Changes in v9:
> > - minor changes
> > - rebased on top of broonie/for-4.19
> >
> > Changes in v8:
> > - fixed passing an empty mfd cell if "atmel,usart-mode" value is invalid
> >
> > Changes in v7:
> > - synced up SPDIX license with module license
> > - numbering of usart modes starts from 0 insteand of 1
> >
> > Changes in v6:
> > - removed unused compatible strings from serial and spi drivers
> >
> > Changes in v5:
> > - fixed usage of stdout-path property with atmel_serial driver
> >
> > Changes in v4:
> > - modified the spi driver to use cs gpio support form spi subsystem
> > - fixed dma transfers for serial driver
> > - squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
> >
> > Changes in v3:
> > - fixed spi slaves probing
> >
> > Changes in v2:
> > - added at91-usart mfd driver
> > - modified spi-at91-usart driver to work as mfd driver child
> > - modified atmel_serial driver to work as mfd driver child
> >
> > Changes in v1:
> > - added spi-at91-usart driver
> >
> >
> > Radu Pirea (6):
> > MAINTAINERS: add at91 usart mfd driver
> > dt-bindings: add binding for atmel-usart in SPI mode
> > mfd: at91-usart: added mfd driver for usart
> > MAINTAINERS: add at91 usart spi driver
> > spi: at91-usart: add driver for at91-usart as spi
> > tty/serial: atmel: change the driver to work under at91-usart mfd
>
> For the record or if needed by the MAINTAINERS changes, you can add my:
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> for the whole series.
>
> Once the remarks by Mark are addressed, you can certainly re-send the series
> with all tags collected for Lee to take it, if he is okay with this process,
> of course...

That's fine. No problem.

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
\
 
 \ /
  Last update: 2018-07-15 22:06    [W:0.090 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site