lkml.org 
[lkml]   [2018]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] gpio: mxc: add power management support
Hi Anson,

On Tue, Jul 10, 2018 at 4:48 AM, Anson Huang <Anson.Huang@nxp.com> wrote:
> GPIO registers could lose context on some i.MX SoCs,
> like on i.MX7D, when enter LPSR mode, the whole SoC

After further reviewing this patchI have a question: here you say that
i.MX7D needs to save some registers.

> will be powered off except LPSR domain, GPIO banks
> will lose context in this case, need to restore
> the context after resume from LPSR mode.
>
> This patch adds GPIO save/restore for those necessary
> registers, and put the save/restore operations in noirq
> suspend/resume phase, since GPIO is fundamental module
> which could be used by other peripherals' resume phase.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> drivers/gpio/gpio-mxc.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 2f28299..0fc52d8 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -45,6 +45,15 @@ struct mxc_gpio_hwdata {
> unsigned fall_edge;
> };
>
> +struct mxc_gpio_reg_saved {
> + u32 icr1;
> + u32 icr2;
> + u32 imr;
> + u32 gdir;
> + u32 edge_sel;
> + u32 dr;
> +};
> +
> struct mxc_gpio_port {
> struct list_head node;
> void __iomem *base;
> @@ -55,6 +64,7 @@ struct mxc_gpio_port {
> struct gpio_chip gc;
> struct device *dev;
> u32 both_edges;
> + struct mxc_gpio_reg_saved gpio_saved_reg;
> };
>
> static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
> @@ -497,6 +507,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
> list_add_tail(&port->node, &mxc_gpio_ports);
>
> + platform_set_drvdata(pdev, port);
> +
> return 0;
>
> out_irqdomain_remove:
> @@ -507,11 +519,67 @@ static int mxc_gpio_probe(struct platform_device *pdev)
> return err;
> }
>
> +static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
> +{
> + if (mxc_gpio_hwtype == IMX21_GPIO)
> + return;

but here you only block IMX21_GPIO.

This means that mx31/mx35/mx51/mx53/mx6 will execute this code too
now. Is this always safe?

Shouldn't it this save/restore be executed only on mx7d?

Please clarify.
\
 
 \ /
  Last update: 2018-07-15 22:07    [W:0.089 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site