Messages in this thread | | | Subject | Re: [PATCH 1/2] mux:adgs1408/1409: New driver for Analog Devices ADGS1408/1409 mux … | From | Randy Dunlap <> | Date | Fri, 13 Jul 2018 09:27:33 -0700 |
| |
On 07/13/2018 05:27 AM, Mircea Caprioru wrote: > This patch adds basic support for Analog Device ADGS1408/09 SPI mux > controller. > > The device is probed and set to a disabled state. It uses the new mux > controller framework. > > Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> > --- > MAINTAINERS | 7 +++ > drivers/mux/Kconfig | 12 ++++ > drivers/mux/Makefile | 2 + > drivers/mux/adgs140x.c | 132 +++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 153 insertions(+) > create mode 100644 drivers/mux/adgs140x.c
> diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig > index 6241678e99af..87b3fda56d8f 100644 > --- a/drivers/mux/Kconfig > +++ b/drivers/mux/Kconfig > @@ -48,4 +48,16 @@ config MUX_MMIO > To compile the driver as a module, choose M here: the module will > be called mux-mmio. > > +config MUX_ADGS140X > + tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers" > + depends on SPI > + help > + ADGS1408 and ADGS1409 4 independent single-pole/single-throw
maybe: ADGS1408 and ADGS1409 have 4 independent single-pole/single-throw
> + switches. > + > + The driver suports driving each switch independently.
supports
> + > + To compile the driver as a module, choose M here: the module will > + be called mux-ads140x.
mux-adgs140x.
> + > endmenu > diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile > index c3d883955fd5..236e7738462a 100644 > --- a/drivers/mux/Makefile > +++ b/drivers/mux/Makefile > @@ -5,10 +5,12 @@ > > mux-core-objs := core.o > mux-adg792a-objs := adg792a.o > +mux-adgs140x-objs := adgs140x.o > mux-gpio-objs := gpio.o > mux-mmio-objs := mmio.o > > obj-$(CONFIG_MULTIPLEXER) += mux-core.o > obj-$(CONFIG_MUX_ADG792A) += mux-adg792a.o > +obj-$(CONFIG_MUX_ADGS140X) += mux-adgs140x.o > obj-$(CONFIG_MUX_GPIO) += mux-gpio.o > obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
-- ~Randy
| |