Messages in this thread | | | From | Gregory CLEMENT <> | Subject | [PATCH net-next v2 0/7] A fix and a few improvements on mvneta | Date | Fri, 13 Jul 2018 18:18:34 +0200 |
| |
Hello,
This series brings some improvements for the mvneta driver and also adds a fix.
Compared to the v1, the main change is the a new patch fixing a bug which is visible in net-next. Now the mvneta driver just crashes when opening on Armada 37xx. As indicated in the patch, the bug was there since many releases but the problem is only visible now.
The series had been tested on ARM32 (clearfog) and ARM64 (EspressoBin), with and without hardware buffer management.
Gregory
Chnagelog: v1 -> v2
- In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and mvneta_bm_put to be used in module, reported by kbuild test robot.
- In patch 4, add the counter to the driver's ethtool state, suggested by David Miller.
- In patch 6, use a single if, suggested by Marcin Wojtas
Andrew Lunn (1): net: ethernet: mvneta: Fix napi structure mixup on armada 3700
Gregory CLEMENT (3): net: mvneta: remove data pointer usage from device_node structure net: mvneta: discriminate error cause for missed packet net: mvneta: Allocate page for the descriptor
Yelena Krivosheev (3): net: mvneta: increase number of buffers in RX and TX queue net: mvneta: Verify hardware checksum only when offload checksum feature is set net: mvneta: Improve the buffer allocation method for SWBM
drivers/net/ethernet/marvell/mvneta.c | 412 ++++++++++++++--------- drivers/net/ethernet/marvell/mvneta_bm.c | 15 + drivers/net/ethernet/marvell/mvneta_bm.h | 8 +- 3 files changed, 274 insertions(+), 161 deletions(-)
-- 2.18.0
| |