lkml.org 
[lkml]   [2018]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
Date
On Fri, 2018-07-13 at 16:17 +0300, Aapo Vienamo wrote:
> Implement and use tegra_sdhci_get_max_clock() which returns the true
> maximum host clock rate. The issue with tegra_sdhci_get_max_clock()
> is
> that it returns the current clock rate of the host instead of the
> maximum one, which can lead to unnecessarily small clock rates.
>
> This differs from the previous implementation of
> tegra_sdhci_get_max_clock() in that it doesn't divide the result by
> two.
>
> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>

The whole series stress-tested on various Apalis T30 as well as Colibri
T30 modules:

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> ---
> drivers/mmc/host/sdhci-tegra.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-
> tegra.c
> index 28b98e2..ddf00166 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -235,6 +235,13 @@ static void tegra_sdhci_set_uhs_signaling(struct
> sdhci_host *host,
> sdhci_set_uhs_signaling(host, timing);
> }
>
> +static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host
> *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_round_rate(pltfm_host->clk, UINT_MAX);
> +}
> +
> static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned
> int tap)
> {
> u32 reg;
> @@ -299,7 +306,7 @@ static const struct sdhci_ops tegra_sdhci_ops = {
> .platform_execute_tuning = tegra_sdhci_execute_tuning,
> .set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
> .voltage_switch = tegra_sdhci_voltage_switch,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .get_max_clock = tegra_sdhci_get_max_clock,
> };
>
> static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
> @@ -356,7 +363,7 @@ static const struct sdhci_ops tegra114_sdhci_ops
> = {
> .platform_execute_tuning = tegra_sdhci_execute_tuning,
> .set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
> .voltage_switch = tegra_sdhci_voltage_switch,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .get_max_clock = tegra_sdhci_get_max_clock,
> };
>
> static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {

Works quite nicely on today's next together with Stefan's patch set [1]:

root@apalis-t30:~# cat /sys/kernel/debug/mmc1/ios
clock: 52000000 Hz
actual clock: 51000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
root@apalis-t30:~# hdparm -t /dev/mmcblk1

/dev/mmcblk1:
Timing buffered disk reads: 236 MB in 3.01 seconds = 78.42 MB/sec

root@colibri-t30:~# cat /sys/kernel/debug/mmc0/ios
clock: 52000000 Hz
actual clock: 51000000 Hz
vdd: 21 (3.3 ~ 3.4 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
root@colibri-t30:~# hdparm -t /dev/mmcblk0

/dev/mmcblk0:
Timing buffered disk reads: 168 MB in 3.00 seconds = 55.99 MB/sec

[1] https://lore.kernel.org/lkml/20180712073904.4705-1-stefan@agner.ch
\
 
 \ /
  Last update: 2018-07-15 22:07    [W:3.933 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site