lkml.org 
[lkml]   [2018]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] add memcpy support for sdma
Date
This patchset is to add memcpy interface for imx-sdma, besides,to
support dmatest and enable config by default, so that could test dma
easily without any other device support such as uart/audio/spi...

Change from v1:
1. remove bus_width check for memcpy since only max bus width needed for
memcpy case to speedup copy.
2. remove DMATEST support patch, since DMATEST is a common memcpy case.
3. split to single patch for SDMA_BD_MAX_CNT instead of '0xffff'
4. move sdma_config_ownership() from alloc_chan into sdma_prep_memcpy.
5. address some minor review comments.

Robin Gong (3):
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: imx-sdma: add memcpy interface
ARM: configs: imx_v6_v7_defconfig: add DMATEST support

arch/arm/configs/imx_v6_v7_defconfig | 3 +-
drivers/dma/imx-sdma.c | 106 ++++++++++++++++++++++++++++++++---
2 files changed, 99 insertions(+), 10 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2018-07-15 22:06    [W:0.062 / U:3.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site