lkml.org 
[lkml]   [2018]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] ARM: dts: am335x: add am335x-sancloud-bbe board support
From
Date


> Op 12 jul. 2018, om 05:08 heeft Robert Nelson <robertcnelson@gmail.com> het volgende geschreven:
>
> On Wed, Jul 11, 2018 at 8:31 AM, Tony Lindgren <tony@atomide.com> wrote:
>> * Koen Kooi <koen@dominion.thruhere.net> [180711 07:36]:
>>> +&cpu0_opp_table {
>>> + /*
>>> + * All PG 2.0 silicon may not support 1GHz but some of the early
>>> + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
>>> + * to support 1GHz OPP so enable it for PG 2.0 on this board.
>>> + */
>>> + oppnitro-1000000000 {
>>> + opp-supported-hw = <0x06 0x0100>;
>>> + };
>>> +};
>>
>> Is the above valid for new boards or should it be just
>> dropped? Or is the comment just out of date?
>
> For SanCloud, this can be dropped, they got normal 1Ghz parts from TI.
>
> and they aren't using the Octavo SIP which didn't have the 1Ghz efuse set..
>
> So just the normal am335x errata, nothing special required in it’s dts...

Thanks for the info! I’ll send a v3 with that bit removed shortly after I figure out what trips up kbuild.

regards,

Koen
\
 
 \ /
  Last update: 2018-07-15 22:05    [W:0.052 / U:1.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site