lkml.org 
[lkml]   [2018]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 3.16 070/410] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
    3.16.57-rc1 review patch.  If anyone has any objections, please let me know.

    ------------------

    From: "Andrew F. Davis" <afd@ti.com>

    commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.

    The correct DT property for specifying a GPIO used for reset
    is "reset-gpios", fix this here.

    Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

    Signed-off-by: Andrew F. Davis <afd@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
    ---
    arch/arm/boot/dts/omap3-n900.dts | 4 ++--
    1 file changed, 2 insertions(+), 2 deletions(-)

    --- a/arch/arm/boot/dts/omap3-n900.dts
    +++ b/arch/arm/boot/dts/omap3-n900.dts
    @@ -427,7 +427,7 @@
    tlv320aic3x: tlv320aic3x@18 {
    compatible = "ti,tlv320aic3x";
    reg = <0x18>;
    - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
    + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
    ai3x-gpio-func = <
    0 /* AIC3X_GPIO1_FUNC_DISABLED */
    5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
    @@ -444,7 +444,7 @@
    tlv320aic3x_aux: tlv320aic3x@19 {
    compatible = "ti,tlv320aic3x";
    reg = <0x19>;
    - gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
    + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */

    AVDD-supply = <&vmmc2>;
    DRVDD-supply = <&vmmc2>;
    \
     
     \ /
      Last update: 2018-06-07 16:57    [W:5.633 / U:0.308 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site