lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 01/10] mfd: da9063: Fix failpath in core
From
Date
On 06/04/2018 02:24 PM, Lee Jones wrote:
> On Sat, 02 Jun 2018, Marek Vasut wrote:
>
>> In case mfd_add_devices() fails, da9063_irq_exit() is not called to
>> undo the IRQchip setup done by da9063_irq_init(). Fix this by adding
>> the missing fail path.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: Mark Brown <broonie@kernel.org>
>> Cc: Steve Twiss <stwiss.opensource@diasemi.com>
>> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
>> Cc: linux-renesas-soc@vger.kernel.org
>> ---
>> V3: New patch
>> ---
>> drivers/mfd/da9063-core.c | 8 +++++++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
>> index 6c2870d4e754..8226ebd8b96d 100644
>> --- a/drivers/mfd/da9063-core.c
>> +++ b/drivers/mfd/da9063-core.c
>> @@ -229,10 +229,16 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
>> ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
>> ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
>> NULL);
>> - if (ret)
>> + if (ret) {
>> dev_err(da9063->dev, "Cannot add MFD cells\n");
>> + goto err_irq_exit;
>> + }
>>
>> return ret;
>> +
>> +err_irq_exit:
>> + da9063_irq_exit(da9063);
>> + return ret;
>> }
>>
>> void da9063_device_exit(struct da9063 *da9063)
>
> I haven't seen the later patches yet, so maybe the goto label expanded
> on, but if it's not, then this would be better:
>
> - if (ret)
> + if (ret) {
> dev_err(da9063->dev, "Cannot add MFD cells\n");
> + da9063_irq_exit(da9063);
> + }
>
> return ret;
> }

It did expand in the later patches, yes.

--
Best regards,
Marek Vasut

\
 
 \ /
  Last update: 2018-06-04 15:08    [W:0.186 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site