lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: sun8i-h3: Increase the GPU clock to 576 MHz
On Wed, Jun 27, 2018 at 09:26:35AM +0200, Paul Kocialkowski wrote:
> It was reported (based on declarations from the Allwiner BSP) that the
> Mali 400 found on the H3 can be clocked up to 576 MHz.
>
> The frequency was tested using the r6p2 out-of-tree driver and a Kodi
> userspace with associated r6p2 blobs, leading to a working result.
>
> This increases the clock to 576 MHz, which directly increases the pixel
> throughput of the GPU (given the 1 pixel-per-cycle rate).
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 41d57c76f290..a14a63092dc6 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -133,7 +133,7 @@
> resets = <&ccu RST_BUS_GPU>;
>
> assigned-clocks = <&ccu CLK_GPU>;
> - assigned-clock-rates = <384000000>;
> + assigned-clock-rates = <576000000>;

This should really be fixed through the driver or through OPPs,
instead of just coding it here and hoping that it will remain set to
that rate.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-06-27 22:08    [W:0.048 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site