lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/8] dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs
From
Date
Hi Bjorn,
Thanks for the review will address the comments in the next respin.

On 06/23/2018 06:14 AM, Bjorn Andersson wrote:
> On Mon 21 May 10:27 PDT 2018, Sibi Sankar wrote:
>
>> Add SDM845 AOSS (always on subsystem) reset controller binding
>>
>
> I think it would be better if you made the binding represent the entire
> clock controller, rather than only the reset-related portion of it.
>
> As I can't find anything in the downstream kernel that references the
> clock part of the hardware block I think the driver can be kept as is
> (with updated compatible and adjust the offsets of the registers)
>
>
> This makes the DT better represents the hardware and it makes it
> possible to control the clocks in the future, without breaking backwards
> compatibility with existing DTBs.
>

yup makes sense.

>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>> .../bindings/reset/qcom,aoss-reset.txt | 52 +++++++++++++++++++
>> include/dt-bindings/reset/qcom,sdm845-aoss.h | 17 ++++++
>> 2 files changed, 69 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
>> create mode 100644 include/dt-bindings/reset/qcom,sdm845-aoss.h
>>
>> diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
>> new file mode 100644
>> index 000000000000..cd5dcafb4ed7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
>> @@ -0,0 +1,52 @@
>> +Qualcomm AOSS Reset Controller
>> +======================================
>> +
>> +This binding describes a reset-controller found on AOSS (always on subsystem)
>> +for Qualcomm SDM845 SoCs.
>> +
>> +Required properties:
>> +- compatible:
>> + Usage: required
>> + Value type: <string>
>> + Definition: must be:
>> + "qcom,sdm845-aoss-reset"
>
> qcom,sdm845-aoss-cc
>
>> +
>> +- reg:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: must specify the base address and size of the register
>> + space.
>> +
>> +- #reset-cells:
>> + Usage: required
>> + Value type: <uint>
>> + Definition: must be 1; cell entry represents the reset index.
>> +
>> +Example:
>> +
>> +aoss_reset: reset-controller@c2b0000 {
>> + compatible = "qcom,sdm845-aoss-reset";
>> + reg = <0xc2b0000 0x21000>;
>
> reg = <0xc2a0000 0x31000>;
>
>> + #reset-cells = <1>;
>> +};
>> +
>
> Apart from this the binding looks good!
>
> Regards,
> Bjorn
>

--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-06-27 16:24    [W:0.092 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site