lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
On Tue, Jun 26, 2018 at 04:22:00PM +0200, Rafael J. Wysocki wrote:
> On Tue, Jun 26, 2018 at 4:01 PM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Tue, Jun 26, 2018 at 12:06:01PM +0200, Rafael J. Wysocki wrote:
> >> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> >> + /*
> >> + * In some cases (eg. Samsung 305V4A) leaving a bridge in suspend
> >> + * confuses the platform firmware, so avoid doing that, unless the
> >> + * bridge has a driver that should take care of PM handling.
> >> + */
> >> + if (pci_is_bridge(dev) && !dev->driver)
> >> + return true;
> >
> > It sounds like the question of whether leaving a bridge in D3 confuses
> > the firmware has a platform-specific answer.
>
> Well, it may confuse the platform firmware in general.
>
> > How does the driver PM handling know how to do the right thing?
>
> For endpoints this is not an issue as they always have been expected
> to be in D3 before passing control to the platform firmware on S3
> entry, but we've never done that for bridges by default, except for
> PCIe ports with PM enabled (in which case the driver decides whether
> or not to enable it).

If there's any spec reference for the expected power states of devices
when entering S3, that would be useful here. I can't tell if there's
any guidance for this or if it's just figured out experimentally.

> > Does it need to know whether
> > it's safe to put the device in D3? Or maybe a device is never put in
> > D3 for system suspend if it has a driver?
>
> As per the above, endpoints should be OK (or they are quirky if not),
> but bridges are sort of a gray area. PCIe ports for which we enable
> PM should be fine, for the rest it's better to be conservative and
> resume them IMO.

\
 
 \ /
  Last update: 2018-06-26 19:14    [W:0.081 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site