lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] power: generic-adc-battery: fix out-of-bounds write when copying channel properties
Date
We did have sporadic problems in the pinctrl framework during boot
where a pin group name unexpectedly became NULL leading to a NULL
dereference in strcmp.

Detailled analysis of the failing cases did reveal that there were
two devm allocated objects close to each other. The second one was
the affected group_desc in pinmux and the first one was the
psy_desc->properties buffer of the gab driver.

Review of the gab code showed that the address calculation for
one memcpy() is wrong. It does

properties + sizeof(type) * index

but C is defined to do the index multiplication already for
pointer + integer additions. Hence the factor was applied twice
and the memcpy() does write outside of the properties buffer.
Sometimes it happened to be the pinctrl and triggered the strcmp(NULL).

Anyways, it is overkill to use a memcpy() here instead of a simple
assignment, which is easier to read and has less risk for wrong
address calculations. So we change code to a simple assignment.

If we initialize the index to the first free location, we can even
remove the local variable 'properties'.

This bug seems to exist right from the beginning in 3.7-rc1 in

commit e60fea794e6e ("power: battery: Generic battery driver using IIO")

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
---
drivers/power/supply/generic-adc-battery.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
index 28dc056eaafa..11f59275bff4 100644
--- a/drivers/power/supply/generic-adc-battery.c
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -241,10 +241,9 @@ static int gab_probe(struct platform_device *pdev)
struct power_supply_desc *psy_desc;
struct power_supply_config psy_cfg = {};
struct gab_platform_data *pdata = pdev->dev.platform_data;
- enum power_supply_property *properties;
int ret = 0;
int chan;
- int index = 0;
+ int index = ARRAY_SIZE(gab_props);

adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
if (!adc_bat) {
@@ -278,8 +277,6 @@ static int gab_probe(struct platform_device *pdev)
}

memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
- properties = (enum power_supply_property *)
- ((char *)psy_desc->properties + sizeof(gab_props));

/*
* getting channel from iio and copying the battery properties
@@ -293,15 +290,12 @@ static int gab_probe(struct platform_device *pdev)
adc_bat->channel[chan] = NULL;
} else {
/* copying properties for supported channels only */
- memcpy(properties + sizeof(*(psy_desc->properties)) * index,
- &gab_dyn_props[chan],
- sizeof(gab_dyn_props[chan]));
- index++;
+ psy_desc->properties[index++] = gab_dyn_props[chan];
}
}

/* none of the channels are supported so let's bail out */
- if (index == 0) {
+ if (index == ARRAY_SIZE(gab_props)) {
ret = -ENODEV;
goto second_mem_fail;
}
@@ -312,7 +306,7 @@ static int gab_probe(struct platform_device *pdev)
* as come channels may be not be supported by the device.So
* we need to take care of that.
*/
- psy_desc->num_properties = ARRAY_SIZE(gab_props) + index;
+ psy_desc->num_properties = index;

adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
if (IS_ERR(adc_bat->psy)) {
--
2.12.2
\
 
 \ /
  Last update: 2018-06-26 15:30    [W:0.044 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site