lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] clk: meson: drop clk-audio-divider
From
Date
On Wed, 2018-06-20 at 12:06 +0200, Jerome Brunet wrote:
> As explained in the commit descriptions, clk-audio-divider was a poor
> solution to make sure PLL rates would be high enough while using CCF
> rate propagation to determine audio clock rates.
>
> Stopping rate propagation before the PLLs is actually simpler and provides
> better results. It also allow to get rid of clk-audio-divider.
>
> Off tree sound cards using these clocks should add the following to the
> sound card DT to properly setup the PLLs:
>
> assigned-clocks = <&clkc CLKID_MPLL2>,
> <&clkc CLKID_MPLL0>,
> <&clkc CLKID_MPLL1>;
> assigned-clock-parents = <0>, <0>, <0>;
> assigned-clock-rates = <294912000>,
> <270950400>,
> <393216000>;
>
> * MPLL2: 294912000Hz: 192Khz * 32 * 24 * 2
> used 24, 48, 96, 192Khz
>
> * MPLL0: 270950400Hz: 176.4Khz * 32 * 24 * 2
> used for 5.512, 10.025, 20.05, 44.1, 88.2 and 176,4Khz
>
> * MPLL1: 393216000Hz: 64Khz * 32 * 24 * 8
> used for 8, 16, 32 and 64Khz
>
> Jerome Brunet (2):
> clk: meson: stop rate propagation for audio clocks
> clk: meson: remove unused clk-audio-divider driver
>
> drivers/clk/meson/Makefile | 2 +-
> drivers/clk/meson/clk-audio-divider.c | 110 ----------------------------------
> drivers/clk/meson/clkc.h | 7 ---
> drivers/clk/meson/gxbb.c | 16 +++--
> 4 files changed, 8 insertions(+), 127 deletions(-)
> delete mode 100644 drivers/clk/meson/clk-audio-divider.c
>

Rebased and applied with Neil's ack.

\
 
 \ /
  Last update: 2018-06-26 13:20    [W:0.049 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site