lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
On Tue, 26 Jun 2018 03:04:06 +0100,
Mars Cheng <mars.cheng@mediatek.com> wrote:
>
> This adds basic chip support for MT6765 SoC.
>
> Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6765-evb.dts | 33 ++++++
> arch/arm64/boot/dts/mediatek/mt6765.dtsi | 158 +++++++++++++++++++++++++++
> 3 files changed, 192 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6765.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6765.dtsi b/arch/arm64/boot/dts/mediatek/mt6765.dtsi
> new file mode 100644
> index 0000000..ab34c0f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6765.dtsi

[...]

> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;

GICv3 doesn't encode the PPI affinity in its interrupt specifiers (or
at least not this way). Please drop it.

> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + sysirq: intpol-controller@10200a80 {
> + compatible = "mediatek,mt6765-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x50>;
> + };
> +
> + gic: interrupt-controller@0c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #redistributor-regions = <1>;

A single redistributor is the default, and you don't need to specify
it in the DT.

> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, // distributor
> + <0 0x0c100000 0 0x200000>; // redistributor

How about the GICv2 compatibility regions, which are provided by the
CPUs at a fixed offset from PERIPHBASE? See the Cortex-A53 TRM for
detail, and please add the missing regions.

> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };

Thanks,

M.

--
Jazz is not dead, it just smell funny.

\
 
 \ /
  Last update: 2018-06-26 09:54    [W:0.078 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site