lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/8] interconnect: Add generic on-chip interconnect API
On Tue, Jun 26, 2018 at 4:57 PM, Evan Green <evgreen@chromium.org> wrote:
> Hi Georgi. Thanks for the new spin of this.
>
> On Wed, Jun 20, 2018 at 5:11 AM Georgi Djakov <georgi.djakov@linaro.org> wrote:
>>
>> This patch introduce a new API to get requirements and configure the
>> interconnect buses across the entire chipset to fit with the current
>> demand.
>>
>> The API is using a consumer/provider-based model, where the providers are
>> the interconnect buses and the consumers could be various drivers.
>> The consumers request interconnect resources (path) between endpoints and
>> set the desired constraints on this data flow path. The providers receive
>> requests from consumers and aggregate these requests for all master-slave
>> pairs on that path. Then the providers configure each participating in the
>> topology node according to the requested data flow path, physical links and
>> constraints. The topology could be complicated and multi-tiered and is SoC
>> specific.
>>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>> Documentation/interconnect/interconnect.rst | 96 ++++
>> drivers/Kconfig | 2 +
>> drivers/Makefile | 1 +
>> drivers/interconnect/Kconfig | 10 +
>> drivers/interconnect/Makefile | 2 +
>> drivers/interconnect/core.c | 586 ++++++++++++++++++++
>> include/linux/interconnect-provider.h | 127 +++++
>> include/linux/interconnect.h | 42 ++
>> 8 files changed, 866 insertions(+)
>> create mode 100644 Documentation/interconnect/interconnect.rst
>> create mode 100644 drivers/interconnect/Kconfig
>> create mode 100644 drivers/interconnect/Makefile
>> create mode 100644 drivers/interconnect/core.c
>> create mode 100644 include/linux/interconnect-provider.h
>> create mode 100644 include/linux/interconnect.h
>>
>> diff --git a/Documentation/interconnect/interconnect.rst b/Documentation/interconnect/interconnect.rst
>> new file mode 100644
>> index 000000000000..a1ebd83ad0a1
>> --- /dev/null
>> +++ b/Documentation/interconnect/interconnect.rst
>> @@ -0,0 +1,96 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +=====================================
>> +GENERIC SYSTEM INTERCONNECT SUBSYSTEM
>> +=====================================
>> +
>> +Introduction
>> +------------
>> +
>> +This framework is designed to provide a standard kernel interface to control
>> +the settings of the interconnects on a SoC. These settings can be throughput,
>> +latency and priority between multiple interconnected devices or functional
>> +blocks. This can be controlled dynamically in order to save power or provide
>> +maximum performance.
>> +
>> +The interconnect bus is a hardware with configurable parameters, which can be
>> +set on a data path according to the requests received from various drivers.
>> +An example of interconnect buses are the interconnects between various
>> +components or functional blocks in chipsets. There can be multiple interconnects
>> +on a SoC that can be multi-tiered.
>> +
>> +Below is a simplified diagram of a real-world SoC interconnect bus topology.
>> +
>> +::
>> +
>> + +----------------+ +----------------+
>> + | HW Accelerator |--->| M NoC |<---------------+
>> + +----------------+ +----------------+ |
>> + | | +------------+
>> + +-----+ +-------------+ V +------+ | |
>> + | DDR | | +--------+ | PCIe | | |
>> + +-----+ | | Slaves | +------+ | |
>> + ^ ^ | +--------+ | | C NoC |
>> + | | V V | |
>> + +------------------+ +------------------------+ | | +-----+
>> + | |-->| |-->| |-->| CPU |
>> + | |-->| |<--| | +-----+
>> + | Mem NoC | | S NoC | +------------+
>> + | |<--| |---------+ |
>> + | |<--| |<------+ | | +--------+
>> + +------------------+ +------------------------+ | | +-->| Slaves |
>> + ^ ^ ^ ^ ^ | | +--------+
>> + | | | | | | V
>> + +------+ | +-----+ +-----+ +---------+ +----------------+ +--------+
>> + | CPUs | | | GPU | | DSP | | Masters |-->| P NoC |-->| Slaves |
>> + +------+ | +-----+ +-----+ +---------+ +----------------+ +--------+
>> + |
>> + +-------+
>> + | Modem |
>> + +-------+
>> +
>> +Terminology
>> +-----------
>> +
>> +Interconnect provider is the software definition of the interconnect hardware.
>> +The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC
>> +and Mem NoC.
>> +
>> +Interconnect node is the software definition of the interconnect hardware
>> +port. Each interconnect provider consists of multiple interconnect nodes,
>> +which are connected to other SoC components including other interconnect
>> +providers. The point on the diagram where the CPUs connects to the memory is
>> +called an interconnect node, which belongs to the Mem NoC interconnect provider.
>> +
>> +Interconnect endpoints are the first or the last element of the path. Every
>> +endpoint is a node, but not every node is an endpoint.
>> +
>> +Interconnect path is everything between two endpoints including all the nodes
>> +that have to be traversed to reach from a source to destination node. It may
>> +include multiple master-slave pairs across several interconnect providers.
>> +
>> +Interconnect consumers are the entities which make use of the data paths exposed
>> +by the providers. The consumers send requests to providers requesting various
>> +throughput, latency and priority. Usually the consumers are device drivers, that
>> +send request based on their needs. An example for a consumer is a video decoder
>> +that supports various formats and image sizes.
>> +
>> +Interconnect providers
>> +----------------------
>> +
>> +Interconnect provider is an entity that implements methods to initialize and
>> +configure a interconnect bus hardware. The interconnect provider drivers should
>> +be registered with the interconnect provider core.
>> +
>> +The interconnect framework provider API functions are documented in
>> +.. kernel-doc:: include/linux/interconnect-provider.h
>> +
>> +Interconnect consumers
>> +----------------------
>> +
>> +Interconnect consumers are the clients which use the interconnect APIs to
>> +get paths between endpoints and set their bandwidth/latency/QoS requirements
>> +for these interconnect paths.
>> +
>> +The interconnect framework consumer API functions are documented in
>> +.. kernel-doc:: include/linux/interconnect.h
>> diff --git a/drivers/Kconfig b/drivers/Kconfig
>> index 95b9ccc08165..3ed6ede9d021 100644
>> --- a/drivers/Kconfig
>> +++ b/drivers/Kconfig
>> @@ -217,4 +217,6 @@ source "drivers/siox/Kconfig"
>>
>> source "drivers/slimbus/Kconfig"
>>
>> +source "drivers/interconnect/Kconfig"
>> +
>> endmenu
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index 24cd47014657..0cca95740d9b 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -185,3 +185,4 @@ obj-$(CONFIG_TEE) += tee/
>> obj-$(CONFIG_MULTIPLEXER) += mux/
>> obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/
>> obj-$(CONFIG_SIOX) += siox/
>> +obj-$(CONFIG_INTERCONNECT) += interconnect/
>> diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig
>> new file mode 100644
>> index 000000000000..a261c7d41deb
>> --- /dev/null
>> +++ b/drivers/interconnect/Kconfig
>> @@ -0,0 +1,10 @@
>> +menuconfig INTERCONNECT
>> + tristate "On-Chip Interconnect management support"
>> + help
>> + Support for management of the on-chip interconnects.
>> +
>> + This framework is designed to provide a generic interface for
>> + managing the interconnects in a SoC.
>> +
>> + If unsure, say no.
>> +
>> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile
>> new file mode 100644
>> index 000000000000..97fca2e09d24
>> --- /dev/null
>> +++ b/drivers/interconnect/Makefile
>> @@ -0,0 +1,2 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_INTERCONNECT) += core.o
>> diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
>> new file mode 100644
>> index 000000000000..e7f96fc6722e
>> --- /dev/null
>> +++ b/drivers/interconnect/core.c
>> @@ -0,0 +1,586 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Interconnect framework core driver
>> + *
>> + * Copyright (c) 2018, Linaro Ltd.
>> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/idr.h>
>> +#include <linux/init.h>
>> +#include <linux/interconnect.h>
>> +#include <linux/interconnect-provider.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/slab.h>
>> +
>> +static DEFINE_IDR(icc_idr);
>> +static LIST_HEAD(icc_provider_list);
>> +static DEFINE_MUTEX(icc_lock);
>> +
>> +/**
>> + * struct icc_req - constraints that are attached to each node
>> + *
>> + * @req_node: entry in list of requests for the particular @node
>> + * @node: the interconnect node to which this constraint applies
>> + * @dev: reference to the device that sets the constraints
>> + * @avg_bw: an integer describing the average bandwidth in kbps
>> + * @peak_bw: an integer describing the peak bandwidth in kbps
>> + */
>> +struct icc_req {
>> + struct hlist_node req_node;
>> + struct icc_node *node;
>> + struct device *dev;
>> + u32 avg_bw;
>> + u32 peak_bw;
>> +};
>> +
>> +/**
>> + * struct icc_path - interconnect path structure
>> + * @num_nodes: number of hops (nodes)
>> + * @reqs: array of the requests applicable to this path of nodes
>> + */
>> +struct icc_path {
>> + size_t num_nodes;
>> + struct icc_req reqs[0];
>> +};
>> +
>> +static struct icc_node *node_find(const int id)
>> +{
>> + struct icc_node *node;
>> +
>> + mutex_lock(&icc_lock);
>> + node = idr_find(&icc_idr, id);
>> + mutex_unlock(&icc_lock);
>
> I wonder if this is too low of a level to be dealing with the lock. I
> notice that everywhere you use this function, you afterwards
> immediately grab the lock and do more stuff. Maybe this function
> should have a comment saying it assumes the lock is already held, and
> then you can grab the lock in the callers, since you're doing that
> anyway.
>
>> +
>> + return node;
>> +}
>> +
>> +static struct icc_path *path_allocate(struct icc_node *dst, ssize_t num_nodes)
>> +{
>> + struct icc_node *node = dst;
>> + struct icc_path *path;
>> + size_t i;
>> +
>> + path = kzalloc(sizeof(*path) + num_nodes * sizeof(*path->reqs),
>> + GFP_KERNEL);
>> + if (!path)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + path->num_nodes = num_nodes;
>> +
>> + for (i = 0; i < num_nodes; i++) {
>> + hlist_add_head(&path->reqs[i].req_node, &node->req_list);
>> +
>> + path->reqs[i].node = node;
>> + /* reference to previous node was saved during path traversal */
>> + node = node->reverse;
>> + }
>> +
>> + return path;
>> +}
>> +
>> +static struct icc_path *path_find(struct device *dev, struct icc_node *src,
>> + struct icc_node *dst)
>> +{
>
> I personally prefer a comment somewhere indicating that this function
> assumes icc_lock is already held. Not sure if that's conventional or
> not.

drive-by-note: WARN_ON(!mutex_is_locked(...)) is way more useful than
a comment ;-)

splats as a form of documentation are hugely useful for things that
other drivers may (indirectly) call and (one should assume) mess up
the locking rules the first time they try

BR,
-R

>
>> + struct icc_node *n, *node = NULL;
>> + struct icc_provider *provider;
>> + struct list_head traverse_list;
>> + struct list_head edge_list;
>> + struct list_head visited_list;
>> + size_t i, depth = 0;
>> + bool found = false;
>> + int ret = -EPROBE_DEFER;
>> +
>> + INIT_LIST_HEAD(&traverse_list);
>> + INIT_LIST_HEAD(&edge_list);
>> + INIT_LIST_HEAD(&visited_list);
>> +
>> + list_add_tail(&src->search_list, &traverse_list);
>> + src->reverse = NULL;
>> +
>> + do {
>> + list_for_each_entry_safe(node, n, &traverse_list, search_list) {
>> + if (node == dst) {
>> + found = true;
>> + list_add(&node->search_list, &visited_list);
>> + break;
>> + }
>> + for (i = 0; i < node->num_links; i++) {
>> + struct icc_node *tmp = node->links[i];
>> +
>> + if (!tmp) {
>> + ret = -ENOENT;
>> + goto out;
>> + }
>> +
>> + if (tmp->is_traversed)
>> + continue;
>> +
>> + tmp->is_traversed = true;
>> + tmp->reverse = node;
>> + list_add(&tmp->search_list, &edge_list);
>> + }
>> + }
>> + if (found)
>> + break;
>> +
>> + list_splice_init(&traverse_list, &visited_list);
>> + list_splice_init(&edge_list, &traverse_list);
>> +
>> + /* count the hops away from the source */
>> + depth++;
>> +
>> + } while (!list_empty(&traverse_list));
>> +
>> +out:
>> + /* reset the traversed state */
>> + list_for_each_entry(provider, &icc_provider_list, provider_list) {
>> + list_for_each_entry(n, &provider->nodes, node_list)
>> + if (n->is_traversed)
>> + n->is_traversed = false;
>
> Remove the conditional, just set is_traversed to false.
>
>> + }
>> +
>> + if (found) {
>> + struct icc_path *path = path_allocate(dst, depth);
>
> Is the path supposed to include the source? For instance, if the dst
> were a neighbor, depth would be one, so only dst would be in the path.
> It seems like it might be worthwhile to have the source in there too.
>
>> +
>> + if (IS_ERR(path))
>> + return path;
>> +
>> + /* initialize the path */
>> + for (i = 0; i < path->num_nodes; i++) {
>> + node = path->reqs[i].node;
>> + path->reqs[i].dev = dev;
>> + node->provider->users++;
>
> Should this loop live inside path_allocate? I'm unsure, but maybe at
> least path->reqs[i].dev = dev, since it feels like standard
> initialization of the path.
>
>> + }
>> + return path;
>> + }
>> +
>> + return ERR_PTR(ret);
>> +}
>> +
>> +/*
>> + * We want the path to honor all bandwidth requests, so the average
>> + * bandwidth requirements from each consumer are aggregated at each node
>> + * and provider level. By default the average bandwidth is the sum of all
>> + * averages and the peak will be the highest of all peak bandwidth requests.
>> + */
>> +
>> +static int aggregate_requests(struct icc_node *node)
>> +{
>> + struct icc_provider *p = node->provider;
>> + struct icc_req *r;
>> +
>> + node->avg_bw = 0;
>> + node->peak_bw = 0;
>> +
>> + hlist_for_each_entry(r, &node->req_list, req_node)
>> + p->aggregate(node, r->avg_bw, r->peak_bw,
>> + &node->avg_bw, &node->peak_bw);
>> +
>> + return 0;
>> +}
>> +
>> +static void aggregate_provider(struct icc_provider *p)
>> +{
>> + struct icc_node *n;
>> +
>> + p->avg_bw = 0;
>> + p->peak_bw = 0;
>> +
>> + list_for_each_entry(n, &p->nodes, node_list)
>> + p->aggregate(n, n->avg_bw, n->peak_bw,
>> + &p->avg_bw, &p->peak_bw);
>> +}
>> +
>> +static int apply_constraints(struct icc_path *path)
>> +{
>> + struct icc_node *next, *prev = NULL;
>> + int ret = 0;
>> + int i;
>> +
>> + for (i = 0; i < path->num_nodes; i++, prev = next) {
>> + struct icc_provider *p;
>> +
>> + next = path->reqs[i].node;
>> + /*
>> + * Both endpoints should be valid master-slave pairs of the
>> + * same interconnect provider that will be configured.
>> + */
>> + if (!prev || next->provider != prev->provider)
>> + continue;
>> +
>> + p = next->provider;
>> +
>> + aggregate_provider(p);
>> +
>> + if (p->set) {
>> + /* set the constraints */
>> + ret = p->set(prev, next, p->avg_bw, p->peak_bw);
>> + }
>> +
>> + if (ret)
>> + goto out;
>> + }
>> +out:
>> + return ret;
>> +}
>> +
>> +/**
>> + * icc_set() - set constraints on an interconnect path between two endpoints
>> + * @path: reference to the path returned by icc_get()
>> + * @avg_bw: average bandwidth in kbps
>> + * @peak_bw: peak bandwidth in kbps
>> + *
>> + * This function is used by an interconnect consumer to express its own needs
>> + * in terms of bandwidth for a previously requested path between two endpoints.
>> + * The requests are aggregated and each node is updated accordingly. The entire
>> + * path is locked by a mutex to ensure that the set() is completed.
>> + * The @path can be NULL when the "interconnects" DT properties is missing,
>> + * which will mean that no constraints will be set.
>> + *
>> + * Returns 0 on success, or an appropriate error code otherwise.
>> + */
>> +int icc_set(struct icc_path *path, u32 avg_bw, u32 peak_bw)
>> +{
>> + struct icc_node *node;
>> + struct icc_provider *p;
>> + size_t i;
>> + int ret = 0;
>> +
>> + if (!path)
>> + return 0;
>> +
>> + mutex_lock(&icc_lock);
>> +
>> + for (i = 0; i < path->num_nodes; i++) {
>> + node = path->reqs[i].node;
>> + p = node->provider;
>> +
>> + /* update the consumer request for this path */
>> + path->reqs[i].avg_bw = avg_bw;
>> + path->reqs[i].peak_bw = peak_bw;
>> +
>> + /* aggregate requests for this node */
>> + aggregate_requests(node);
>> + }
>> +
>> + ret = apply_constraints(path);
>> + if (ret)
>> + pr_err("interconnect: error applying constraints (%d)", ret);
>> +
>> + mutex_unlock(&icc_lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_set);
>> +
>> +/**
>> + * icc_get() - return a handle for path between two endpoints
>> + * @dev: the device requesting the path
>> + * @src_id: source device port id
>> + * @dst_id: destination device port id
>> + *
>> + * This function will search for a path between two endpoints and return an
>> + * icc_path handle on success. Use icc_put() to release
>> + * constraints when the they are not needed anymore.
>> + *
>> + * Return: icc_path pointer on success, or ERR_PTR() on error
>> + */
>> +struct icc_path *icc_get(struct device *dev, const int src_id, const int dst_id)
>> +{
>> + struct icc_node *src, *dst;
>> + struct icc_path *path = ERR_PTR(-EPROBE_DEFER);
>> +
>> + src = node_find(src_id);
>> + if (!src) {
>> + dev_err(dev, "%s: invalid src=%d\n", __func__, src_id);
>> + goto out;
>> + }
>> +
>> + dst = node_find(dst_id);
>> + if (!dst) {
>> + dev_err(dev, "%s: invalid dst=%d\n", __func__, dst_id);
>> + goto out;
>> + }
>> +
>> + mutex_lock(&icc_lock);
>> + path = path_find(dev, src, dst);
>> + mutex_unlock(&icc_lock);
>> + if (IS_ERR(path)) {
>> + dev_err(dev, "%s: invalid path=%ld\n", __func__, PTR_ERR(path));
>> + goto out;
>> + }
>> +
>> +out:
>> + return path;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_get);
>> +
>> +/**
>> + * icc_put() - release the reference to the icc_path
>> + * @path: interconnect path
>> + *
>> + * Use this function to release the constraints on a path when the path is
>> + * no longer needed. The constraints will be re-aggregated.
>> + */
>> +void icc_put(struct icc_path *path)
>> +{
>> + struct icc_node *node;
>> + size_t i;
>> + int ret;
>> +
>> + if (!path || WARN_ON_ONCE(IS_ERR(path)))
>
> Why only once?
>
>> + return;
>> +
>> + ret = icc_set(path, 0, 0);
>> + if (ret)
>> + pr_err("%s: error (%d)\n", __func__, ret);
>> +
>> + mutex_lock(&icc_lock);
>> + for (i = 0; i < path->num_nodes; i++) {
>> + node = path->reqs[i].node;
>> + hlist_del(&path->reqs[i].req_node);
>> +
>> + node->provider->users--;
>> + }
>> + mutex_unlock(&icc_lock);
>> +
>> + kfree(path);
>> +}
>> +EXPORT_SYMBOL_GPL(icc_put);
>> +
>> +/**
>> + * icc_node_create() - create a node
>> + * @id: node id
>> + *
>> + * Return: icc_node pointer on success, or ERR_PTR() on error
>> + */
>> +struct icc_node *icc_node_create(int id)
>> +{
>> + struct icc_node *node;
>> +
>> + /* check if node already exists */
>> + node = node_find(id);
>> + if (node)
>> + goto out;
>> +
>> + node = kzalloc(sizeof(*node), GFP_KERNEL);
>> + if (!node) {
>> + node = ERR_PTR(-ENOMEM);
>> + goto out;
>> + }
>> +
>> + mutex_lock(&icc_lock);
>> +
>> + id = idr_alloc(&icc_idr, node, id, id + 1, GFP_KERNEL);
>> + if (WARN(id < 0, "couldn't get idr")) {
>> + node = ERR_PTR(id);
>> + goto out;
>> + }
>> +
>> + node->id = id;
>> +
>> +out:
>> + mutex_unlock(&icc_lock);
>> +
>> + return node;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_node_create);
>> +
>> +/**
>> + * icc_node_remove() - remove a node
>> + * @id: node id
>> + *
>> + */
>> +void icc_node_remove(int id)
>> +{
>> + struct icc_node *node;
>> +
>> + node = node_find(id);
>> + if (node) {
>> + mutex_lock(&icc_lock);
>> + idr_remove(&icc_idr, node->id);
>
> Should we throw a warning if there are any paths that go through this
> node (ie req_list is non-empty)?
>
>> + mutex_unlock(&icc_lock);
>> + }
>> +
>> + kfree(node);
>> +}
>> +EXPORT_SYMBOL_GPL(icc_node_remove);
>> +
>> +/**
>> + * icc_link_create() - create a link between two nodes
>> + * @src_id: source node id
>> + * @dst_id: destination node id
>> + *
>> + * Create a link between two nodes. The nodes might belong to different
>> + * interconnect providers and the @dst_id node might not exist (if the
>> + * provider driver has not probed yet). So just create the @dst_id node
>> + * and when the actual provider driver is probed, the rest of the node
>> + * data is filled.
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +int icc_link_create(struct icc_node *node, const int dst_id)
>> +{
>> + struct icc_node *dst;
>> + struct icc_node **new;
>> + int ret = 0;
>> +
>> + if (!node->provider)
>> + return -EINVAL;
>> +
>> + dst = node_find(dst_id);
>> + if (!dst) {
>> + dst = icc_node_create(dst_id);
>> +
>> + if (IS_ERR(dst)) {
>> + ret = PTR_ERR(dst);
>> + goto out;
>> + }
>> + }
>> +
>> + mutex_lock(&icc_lock);
>> +
>> + new = krealloc(node->links,
>> + (node->num_links + 1) * sizeof(*node->links),
>> + GFP_KERNEL);
>> + if (!new) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + node->links = new;
>> + node->links[node->num_links++] = dst;
>> +
>> +out:
>> + mutex_unlock(&icc_lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_link_create);
>> +
>> +/**
>> + * icc_link_remove() - remove a link between two nodes
>> + * @src: pointer to source node
>> + * @dst: pointer to destination node
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +int icc_link_remove(struct icc_node *src, struct icc_node *dst)
>> +{
>> + struct icc_node **new;
>> + int ret = 0;
>> + int i, j;
>> +
>> + if (IS_ERR_OR_NULL(src))
>> + return PTR_ERR(src);
>> +
>> + if (IS_ERR_OR_NULL(dst))
>> + return PTR_ERR(dst);
>
> I wonder if we should return a fixed error in these cases like
> -EINVAL, rather than handing through whatever crazy value is in
> src/dst.
>
>> +
>> + mutex_lock(&icc_lock);
>> +
>> + new = krealloc(src->links,
>> + (src->num_links - 1) * sizeof(*src->links),
>> + GFP_KERNEL);
>> + if (!new) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + for (i = 0, j = 0; j < src->num_links; j++) {
>> + if (src->links[j] == dst)
>> + continue;
>> +
>> + new[i++] = src->links[j];
>> + }
>> +
>> + src->links = new;
>> + src->num_links--;
>
> My understanding is that once you call realloc and it succeeds, you
> must assume your old memory is gone and your new memory is only as big
> as the new size you request. So you shouldn't call krealloc until
> you've fixed the array up. Is the order of the links array important?
> If not, you could just take the element at the end and stick it in the
> slot that's being deleted. Then decrease the size and do your realloc.
>
>> +
>> +out:
>> + mutex_unlock(&icc_lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_link_remove);
>> +
>> +/**
>> + * icc_node_add() - add an interconnect node to interconnect provider
>> + * @node: pointer to the interconnect node
>> + * @provider: pointer to the interconnect provider
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +int icc_node_add(struct icc_node *node, struct icc_provider *provider)
>> +{
>> + mutex_lock(&icc_lock);
>> +
>> + node->provider = provider;
>> + list_add(&node->node_list, &provider->nodes);
>> +
>> + mutex_unlock(&icc_lock);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_node_add);
>> +
>> +/**
>> + * icc_provider_add() - add a new interconnect provider
>> + * @icc_provider: the interconnect provider that will be added into topology
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +int icc_provider_add(struct icc_provider *provider)
>> +{
>> + if (WARN_ON(!provider->set))
>> + return -EINVAL;
>> +
>> + mutex_init(&icc_lock);
>> +
>> + INIT_LIST_HEAD(&provider->nodes);
>> + list_add(&provider->provider_list, &icc_provider_list);
>> +
>> + mutex_unlock(&icc_lock);
>> +
>> + dev_dbg(provider->dev, "interconnect provider added to topology\n");
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_provider_add);
>> +
>> +/**
>> + * icc_provider_del() - delete previously added interconnect provider
>> + * @icc_provider: the interconnect provider that will be removed from topology
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +int icc_provider_del(struct icc_provider *provider)
>> +{
>> + mutex_lock(&icc_lock);
>> + if (provider->users) {
>> + pr_warn("interconnect provider still has %d users\n",
>> + provider->users);
>> + mutex_unlock(&icc_lock);
>> + return -EBUSY;
>> + }
>> +
>> + if (!list_empty_careful(&provider->nodes)) {
>> + pr_warn("interconnect provider still has nodes\n");
>> + mutex_unlock(&icc_lock);
>> + return -EEXIST;
>
> How come you're returning different error codes for these two cases?
> The error in both cases is effectively "you failed to clean up after
> yourself", so maybe EBUSY makes sense for both of them. The pr_warn
> helps to differentiate between the two for debugging.
>
>> + }
>> +
>> + list_del(&provider->provider_list);
>> + mutex_unlock(&icc_lock);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(icc_provider_del);
>> +
>> +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org");
>> +MODULE_DESCRIPTION("Interconnect Driver Core");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
>> new file mode 100644
>> index 000000000000..f4613c6dce4f
>> --- /dev/null
>> +++ b/include/linux/interconnect-provider.h
>> @@ -0,0 +1,127 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2018, Linaro Ltd.
>> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
>> + */
>> +
>> +#ifndef _LINUX_INTERCONNECT_PROVIDER_H
>> +#define _LINUX_INTERCONNECT_PROVIDER_H
>> +
>> +#include <linux/interconnect.h>
>> +
>> +#define icc_units_to_bps(bw) ((bw) * 1000ULL)
>> +
>> +struct icc_node;
>> +
>> +/**
>> + * struct icc_provider - interconnect provider (controller) entity that might
>> + * provide multiple interconnect controls
>> + *
>> + * @provider_list: list of the registered interconnect providers
>> + * @nodes: internal list of the interconnect provider nodes
>> + * @set: pointer to device specific set operation function
>> + * @aggregate: pointer to device specific aggregate operation function
>> + * @dev: the device this interconnect provider belongs to
>> + * @users: count of active users
>> + * @avg_bw: aggregated value of average bandwidth requests from all nodes
>> + * @peak_bw: aggregated value of peak bandwidth requests from all nodes
>> + * @data: pointer to private data
>> + */
>> +struct icc_provider {
>> + struct list_head provider_list;
>> + struct list_head nodes;
>> + int (*set)(struct icc_node *src, struct icc_node *dst,
>> + u32 avg_bw, u32 peak_bw);
>> + int (*aggregate)(struct icc_node *node, u32 avg_bw, u32 peak_bw,
>> + u32 *agg_avg, u32 *agg_peak);
>> + struct device *dev;
>> + int users;
>> + u32 avg_bw;
>> + u32 peak_bw;
>> + void *data;
>> +};
>> +
>> +/**
>> + * struct icc_node - entity that is part of the interconnect topology
>> + *
>> + * @id: platform specific node id
>> + * @name: node name used in debugfs
>> + * @links: a list of targets pointing to where we can go next when traversing
>> + * @num_links: number of links to other interconnect nodes
>> + * @provider: points to the interconnect provider of this node
>> + * @node_list: the list entry in the parent provider's "nodes" list
>> + * @search_list: list used when walking the nodes graph
>> + * @reverse: pointer to previous node when walking the nodes graph
>> + * @is_traversed: flag that is used when walking the nodes graph
>> + * @req_list: a list of QoS constraint requests associated with this node
>> + * @avg_bw: aggregated value of average bandwidth requests from all consumers
>> + * @peak_bw: aggregated value of peak bandwidth requests from all consumers
>> + * @data: pointer to private data
>> + */
>> +struct icc_node {
>> + int id;
>> + const char *name;
>> + struct icc_node **links;
>> + size_t num_links;
>> +
>> + struct icc_provider *provider;
>> + struct list_head node_list;
>> + struct list_head orphan_list;
>
> Is this used?
>
>> + struct list_head search_list;
>> + struct icc_node *reverse;
>> + bool is_traversed;
>> + struct hlist_head req_list;
>> + u32 avg_bw;
>> + u32 peak_bw;
>> + void *data;
>> +};
>> +
>> +#if IS_ENABLED(CONFIG_INTERCONNECT)
>> +
>> +struct icc_node *icc_node_create(int id);
>> +void icc_node_remove(int id);
>> +int icc_link_create(struct icc_node *node, const int dst_id);
>> +int icc_link_remove(struct icc_node *src, struct icc_node *dst);
>> +int icc_node_add(struct icc_node *node, struct icc_provider *provider);
>> +int icc_provider_add(struct icc_provider *provider);
>> +int icc_provider_del(struct icc_provider *provider);
>> +
>> +#else
>> +
>> +static inline struct icc_node *icc_node_create(int id)
>> +{
>> + return ERR_PTR(-ENOTSUPP);
>> +}
>> +
>> +void icc_node_remove(int id)
>> +{
>> +}
>> +
>> +static inline int icc_link_create(struct icc_node *node, const int dst_id)
>> +{
>> + return -ENOTSUPP;
>> +}
>> +
>> +int icc_link_remove(struct icc_node *src, struct icc_node *dst)
>> +{
>> + return -ENOTSUPP;
>> +}
>> +
>> +int icc_node_add(struct icc_node *node, struct icc_provider *provider)
>> +{
>> + return -ENOTSUPP;
>> +}
>> +
>> +static inline int icc_provider_add(struct icc_provider *provider)
>> +{
>> + return -ENOTSUPP;
>> +}
>> +
>> +static inline int icc_provider_del(struct icc_provider *provider)
>> +{
>> + return -ENOTSUPP;
>> +}
>> +
>> +#endif /* CONFIG_INTERCONNECT */
>> +
>> +#endif /* _LINUX_INTERCONNECT_PROVIDER_H */
>> diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
>> new file mode 100644
>> index 000000000000..593215371fd6
>> --- /dev/null
>> +++ b/include/linux/interconnect.h
>> @@ -0,0 +1,42 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2018, Linaro Ltd.
>> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
>> + */
>> +
>> +#ifndef _LINUX_INTERCONNECT_H
>> +#define _LINUX_INTERCONNECT_H
>> +
>> +#include <linux/mutex.h>
>> +#include <linux/types.h>
>> +
>> +struct icc_path;
>> +struct device;
>> +
>> +#if IS_ENABLED(CONFIG_INTERCONNECT)
>> +
>> +struct icc_path *icc_get(struct device *dev, const int src_id,
>> + const int dst_id);
>> +void icc_put(struct icc_path *path);
>> +int icc_set(struct icc_path *path, u32 avg_bw, u32 peak_bw);
>> +
>> +#else
>> +
>> +static inline struct icc_path *icc_get(struct device *dev, const int src_id,
>> + const int dst_id)
>> +{
>> + return NULL;
>> +}
>> +
>> +static inline void icc_put(struct icc_path *path)
>> +{
>> +}
>> +
>> +static inline int icc_set(struct icc_path *path, u32 avg_bw, u32 peak_bw)
>> +{
>> + return 0;
>
> I was originally going to suggest that this should return a failure.
> Then I talked myself out of it, saying that if the interconnect
> framework is not compiled in, then clients should assume all their bus
> needs are already met. I guess this is the correct assumption?
>
>> +}
>> +
>> +#endif /* CONFIG_INTERCONNECT */
>> +
>> +#endif /* _LINUX_INTERCONNECT_H */

\
 
 \ /
  Last update: 2018-06-27 02:55    [W:0.326 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site