lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] media: cedrus: Add a macro to check for the validity of a control
Date
During our frame decoding setup, we need to check a number of controls to
make sure that they are properly filled before trying to access them.

It's not too bad with MPEG2 since there's just a single one, but with the
upcoming increase of codecs, and the integration of more complex codecs,
this logic will be duplicated a significant number of times. H264 for
example uses 4 different controls.

Add a macro that expands to the proper check in order to reduce the
duplication.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
.../platform/sunxi/cedrus/sunxi_cedrus_dec.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_dec.c b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_dec.c
index 8c92af34ebeb..c19acf9626c4 100644
--- a/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_dec.c
+++ b/drivers/media/platform/sunxi/cedrus/sunxi_cedrus_dec.c
@@ -110,15 +110,16 @@ void sunxi_cedrus_device_run(void *priv)

spin_lock_irqsave(&ctx->dev->irq_lock, flags);

+#define CHECK_CONTROL(ctx, ctrl) \
+ if (!ctx->ctrls[(ctrl)]) { \
+ v4l2_err(&(ctx)->dev->v4l2_dev, "Invalid " #ctrl " control\n"); \
+ (ctx)->job_abort = 1; \
+ goto unlock_complete; \
+ }
+
switch (ctx->vpu_src_fmt->fourcc) {
case V4L2_PIX_FMT_MPEG2_FRAME:
- if (!ctx->ctrls[SUNXI_CEDRUS_CTRL_DEC_MPEG2_FRAME_HDR]) {
- v4l2_err(&ctx->dev->v4l2_dev,
- "Invalid MPEG2 frame header control\n");
- ctx->job_abort = 1;
- goto unlock_complete;
- }
-
+ CHECK_CONTROL(ctx, SUNXI_CEDRUS_CTRL_DEC_MPEG2_FRAME_HDR);
run.mpeg2.hdr = get_ctrl_ptr(ctx, SUNXI_CEDRUS_CTRL_DEC_MPEG2_FRAME_HDR);
sunxi_cedrus_mpeg2_setup(ctx, &run);

@@ -128,6 +129,7 @@ void sunxi_cedrus_device_run(void *priv)
default:
ctx->job_abort = 1;
}
+#undef CHECK_CONTROL

unlock_complete:
spin_unlock_irqrestore(&ctx->dev->irq_lock, flags);
--
2.17.0
\
 
 \ /
  Last update: 2018-06-13 16:09    [W:1.073 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site