lkml.org 
[lkml]   [2018]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] irqchip/gic-v3: do not access GICR_WAKER if its secured register.
From
Date


On 13/06/18 09:45, Sudeep Holla wrote:
> On Wed, Jun 13, 2018 at 9:21 AM, Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org> wrote:
>>
>>
>> On 12/06/18 17:34, Marc Zyngier wrote:
>>>
>>> I suggest you find out how the GIC has been integrated on this
>>> platform. If you take a fault on accessing this register, this very
>>> much looks like an integration bug, and it should be quirked as such.
>>
>> Thanks for the suggestion, This is a bug in the firmware which is
>> restricting access to this register. We have been working around this bug
>> for more than 2 years due to this. Now this platform support is in mainline
>> and We/I have no hope that this will be fixed in near future atleast for
>> this platform.
>>
>
> From what you are saying, you were aware of the firmware bug for 2 years as
> you had work-around from then. I wish the firmware had come up with the fix
> in those lost 2 years. I understand if it was discovered now, but that doesn't
> seem to be the case here.
>
> Firmware fixes are now becoming inevitable, so the attitude that firmware can't
> be fixed has to slowing change. I am not saying I am against the quirk, but in
> general I have seen the firmware support of QCOM parts are really bad. I waited
> for almost 2 years for PSCI firmware on previous dragonboard where developer
> are trying to upstream some feature.
I agree with you!

We did wait for more than 2 years for firmware to be fixed. But it never
happened and very little hopes to get it fixed.

I did try the quirk based on GICD_IIDR and I could boot linus master on
DB820c!

I will send it out as RFC soon.

thanks,
srini
>
> --
> Regards,
> Sudeep
>

\
 
 \ /
  Last update: 2018-06-13 12:54    [W:0.871 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site