lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/5] ARM: dts: cygnus: Fix I2C controller interrupt type
    Date
    Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
    Cygnus SoC

    Fixes: b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus")
    Fixes: 0f0b21a83ad2 ("ARM: dts: Move all Cygnus peripherals into axi bus")
    Fixes: 9c5101f7a253 ("ARM: dts: Reorder Cygnus peripherals")

    Signed-off-by: Ray Jui <ray.jui@broadcom.com>
    ---
    arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++--
    1 file changed, 2 insertions(+), 2 deletions(-)

    diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
    index 9fe4f5a..835a6f7 100644
    --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
    +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
    @@ -216,7 +216,7 @@
    reg = <0x18008000 0x100>;
    #address-cells = <1>;
    #size-cells = <0>;
    - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
    + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
    clock-frequency = <100000>;
    status = "disabled";
    };
    @@ -245,7 +245,7 @@
    reg = <0x1800b000 0x100>;
    #address-cells = <1>;
    #size-cells = <0>;
    - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
    + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
    clock-frequency = <100000>;
    status = "disabled";
    };
    --
    2.1.4
    \
     
     \ /
      Last update: 2018-06-12 22:23    [W:4.448 / U:0.120 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site