lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial
Date
Previous implementation uses a hard-coded register value to check if
the current serial entity is the console entity.
Now the lantiq serial driver uses the aliases for the index of the
serial port.
The lantiq danube serial dts are updated with aliases to support this.

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---

arch/mips/boot/dts/lantiq/danube.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 2dd950181f8a..7a9e15da6bd0 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -4,6 +4,10 @@
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,danube";

+ aliases {
+ serial0 = &asc1;
+ };
+
cpus {
cpu@0 {
compatible = "mips,mips24Kc";
@@ -74,7 +78,7 @@
reg = <0xE100A00 0x100>;
};

- serial@E100C00 {
+ asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
--
2.11.0
\
 
 \ /
  Last update: 2018-06-12 07:44    [W:0.162 / U:1.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site