lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2 5/5] PCI: iproc: Reduce inbound/outbound mapping print level
    On 2018-06-12 05:51, Ray Jui wrote:
    > Reduce inbound/outbound mapping print level from dev_info to
    > dev_dbg. This reduces the console logs during Linux boot process
    >
    > Signed-off-by: Ray Jui <ray.jui@broadcom.com>
    > Reviewed-by: Scott Branden <scott.branden@broadcom.com>
    > ---
    > drivers/pci/host/pcie-iproc.c | 34 +++++++++++++++++-----------------
    > 1 file changed, 17 insertions(+), 17 deletions(-)
    >
    > diff --git a/drivers/pci/host/pcie-iproc.c
    > b/drivers/pci/host/pcie-iproc.c
    > index 59be1e0..3160e93 100644
    > --- a/drivers/pci/host/pcie-iproc.c
    > +++ b/drivers/pci/host/pcie-iproc.c
    > @@ -880,14 +880,14 @@ static inline int iproc_pcie_ob_write(struct
    > iproc_pcie *pcie, int window_idx,
    > writel(lower_32_bits(pci_addr), pcie->base + omap_offset);
    > writel(upper_32_bits(pci_addr), pcie->base + omap_offset + 4);
    >
    > - dev_info(dev, "ob window [%d]: offset 0x%x axi %pap pci %pap\n",
    > - window_idx, oarr_offset, &axi_addr, &pci_addr);
    > - dev_info(dev, "oarr lo 0x%x oarr hi 0x%x\n",
    > - readl(pcie->base + oarr_offset),
    > - readl(pcie->base + oarr_offset + 4));
    > - dev_info(dev, "omap lo 0x%x omap hi 0x%x\n",
    > - readl(pcie->base + omap_offset),
    > - readl(pcie->base + omap_offset + 4));
    > + dev_dbg(dev, "ob window [%d]: offset 0x%x axi %pap pci %pap\n",
    > + window_idx, oarr_offset, &axi_addr, &pci_addr);
    > + dev_dbg(dev, "oarr lo 0x%x oarr hi 0x%x\n",
    > + readl(pcie->base + oarr_offset),
    > + readl(pcie->base + oarr_offset + 4));
    > + dev_dbg(dev, "omap lo 0x%x omap hi 0x%x\n",
    > + readl(pcie->base + omap_offset),
    > + readl(pcie->base + omap_offset + 4));
    >
    > return 0;
    > }
    > @@ -1054,8 +1054,8 @@ static int iproc_pcie_ib_write(struct iproc_pcie
    > *pcie, int region_idx,
    > iproc_pcie_reg_is_invalid(imap_offset))
    > return -EINVAL;
    >
    > - dev_info(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n",
    > - region_idx, iarr_offset, &axi_addr, &pci_addr);
    > + dev_dbg(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n",
    > + region_idx, iarr_offset, &axi_addr, &pci_addr);
    >
    > /*
    > * Program the IARR registers. The upper 32-bit IARR register is
    > @@ -1065,9 +1065,9 @@ static int iproc_pcie_ib_write(struct iproc_pcie
    > *pcie, int region_idx,
    > pcie->base + iarr_offset);
    > writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4);
    >
    > - dev_info(dev, "iarr lo 0x%x iarr hi 0x%x\n",
    > - readl(pcie->base + iarr_offset),
    > - readl(pcie->base + iarr_offset + 4));
    > + dev_dbg(dev, "iarr lo 0x%x iarr hi 0x%x\n",
    > + readl(pcie->base + iarr_offset),
    > + readl(pcie->base + iarr_offset + 4));
    >
    > /*
    > * Now program the IMAP registers. Each IARR region may have one or
    > @@ -1081,10 +1081,10 @@ static int iproc_pcie_ib_write(struct
    > iproc_pcie *pcie, int region_idx,
    > writel(upper_32_bits(axi_addr),
    > pcie->base + imap_offset + ib_map->imap_addr_offset);
    >
    > - dev_info(dev, "imap window [%d] lo 0x%x hi 0x%x\n",
    > - window_idx, readl(pcie->base + imap_offset),
    > - readl(pcie->base + imap_offset +
    > - ib_map->imap_addr_offset));
    > + dev_dbg(dev, "imap window [%d] lo 0x%x hi 0x%x\n",
    > + window_idx, readl(pcie->base + imap_offset),
    > + readl(pcie->base + imap_offset +
    > + ib_map->imap_addr_offset));
    >
    > imap_offset += ib_map->imap_window_offset;
    > axi_addr += size;

    Reviewed-by: Oza Pawandeep <poza@codeaurora.org>

    \
     
     \ /
      Last update: 2018-06-12 10:32    [W:4.132 / U:0.292 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site