lkml.org 
[lkml]   [2018]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 8/9] ARM: dts: at91: sama5d2: add channel cells for ADC device
On Tue, 22 May 2018 10:52:38 +0300
Eugen Hristev <eugen.hristev@microchip.com> wrote:

> Preparing the ADC device to connect channel consumer drivers
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
The driver for the touchscreen is no in the IIO tree, but it wasn't
early enough (due to a block on a fix working it's way in) for this
merge window. Will be going upstream in the next merge window.

Thanks,

Jonathan

> ---
> arch/arm/boot/dts/sama5d2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 61f68e5..f06ba99 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -47,6 +47,7 @@
> #include <dt-bindings/dma/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
>
> / {
> model = "Atmel SAMA5D2 family SoC";
> @@ -1437,6 +1438,7 @@
> atmel,max-sample-rate-hz = <20000000>;
> atmel,startup-time-ms = <4>;
> atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
> + #io-channel-cells = <1>;
> status = "disabled";
> };
>

\
 
 \ /
  Last update: 2018-06-10 14:35    [W:0.161 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site