lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] arm64: dts: Update Stingray clock DT nodes
Date
From: Pramod Kumar <pramod.kumar@broadcom.com>

Update clock output names in the Stingray clock DT nodes so they match
the binding document and the latest ASIC datasheet. Also add entries
for LCPLL2

Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
---
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 26 ++++++++++++++++------
1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
reg = <0x0001d104 0x32>,
<0x0001c854 0x4>;
clocks = <&osc>;
- clock-output-names = "genpll0", "clk_125", "clk_scr",
+ clock-output-names = "genpll0", "clk_125m", "clk_scr",
"clk_250", "clk_pcie_axi",
"clk_paxc_axi_x2",
"clk_paxc_axi";
};

+ genpll2: genpll2@1d1ac {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll2";
+ reg = <0x0001d1ac 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll2", "clk_nic",
+ "clk_ts_500_ref", "clk_125_nitro",
+ "clk_chimp", "clk_nic_flash",
+ "clk_fs";
+ };
+
genpll3: genpll3@1d1e0 {
#clock-cells = <1>;
compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
<0x0001c854 0x4>;
clocks = <&osc>;
clock-output-names = "genpll4", "clk_ccn",
- "clk_tpiu_pll", "noc_clk",
- "pll_chclk_fs4",
+ "clk_tpiu_pll", "clk_noc",
+ "clk_chclk_fs4",
"clk_bridge_fscpu";
};

@@ -86,8 +98,8 @@
reg = <0x0001d248 0x32>,
<0x0001c870 0x4>;
clocks = <&osc>;
- clock-output-names = "genpll5", "fs4_hf_clk",
- "crypto_ae_clk", "raid_ae_clk";
+ clock-output-names = "genpll5", "clk_fs4_hf",
+ "clk_crypto_ae", "clk_raid_ae";
};

lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@
reg = <0x0001d138 0x3c>,
<0x0001c870 0x4>;
clocks = <&osc>;
- clock-output-names = "lcpll1", "clk_wanpn",
+ clock-output-names = "lcpll1", "clk_wan",
"clk_usb_ref",
- "timesync_evt_clk";
+ "clk_crmu_ts";
};

hsls_clk: hsls_clk {
--
2.1.4
\
 
 \ /
  Last update: 2018-06-02 02:57    [W:0.130 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site