lkml.org 
[lkml]   [2018]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] clk: imx: Set CLK_SET_RATE_GATE for gate and divider clocks
Date
Quoting Shawn Guo (2018-04-17 19:32:16)
> On Wed, Apr 11, 2018 at 05:03:29PM +0300, Abel Vesa wrote:
> > From: Shawn Guo <shawnguo@kernel.org>
> >
> > Add flag CLK_SET_RATE_GATE for i.MX gate and divider clocks on which the
> > client drivers usually make clk_set_rate() call, so that the call will fail
> > when clock is still on instead of standing the risk of running into glitch
> > issue. Rate cannot be changed when the clock is enabled due to the glitchy
> > multiplexers.
> >
> > Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> > [initial patch from imx internal repo]
> > Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> > [carried over from 3.14 and also applied the flag to newer functions]
> > ---
> >
> > Changes since v1:
> > - changed ownership as per initial patch
>
> IIRC, the patch was created on vendor kernel long time ago to work
> around a specific glitchy multiplexer issue seen on particular SoC.
> I'm not sure it's good for the upstream kernel today.
>

I'm taking this as a Nak. Resend or restart this discussion if you want
me to apply this.

\
 
 \ /
  Last update: 2018-06-01 20:03    [W:0.048 / U:2.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site