lkml.org 
[lkml]   [2018]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH] pinctrl: rockchip: Disable interrupt when changing it's capability
Hi Doug,

Thanks for your reply :)

On 05/09/2018 01:18 PM, Doug Anderson wrote:
>> >
>> >
>> >right, so we now have 2 cases: rockchip_irq_demux/ rockchip_irq_set_type
>> >
>> >if i'm right about the spurious irq(only happen when set rising for a high
>> >gpio, or set falling for a low gpio), then:
>> >
>> >1/ rockchip_irq_demux
>> >it's important to not losing irqs in this case, maybe we can
>> >
>> >a) ack irq
>> >b) update polarity for edge both irq
>> >
>> >we don't need to disable irq in b), since we would not hit the spurious irq
>> >cases here(always check gpio level to toggle it)
> Unless you have some sort of proof that rockchip_irq_demux(), I would
> take it as an example of something that works. I remember stress
> testing the heck out of it. Do you have some evidence that it's not
> working? I think Brian was simply speculating that there might be a
> race here, but I don't think anyone has shown it have they? Looking
> back at my notes, the thing I really made sure to stress was that we
> never got into a situation where we were losing an edge (AKA we were
> never configured to look for a falling edge when the line was already
> low). I'm not sure I confirmed that we never got an extra interrupt.
>
> I'm at home right now and I can't add prints and poke at things, but
> as I understand it for edge interrupts the usual flow to make sure
> interrupts aren't ever lost is:
>
> 1. See that the interrupt went off
> 2. Ack it (clear it)
> 3. Call the interrupt handler
>
> ...presumably in this case rockchip_irq_demux() is called after step
> #2 (but I don't know if it's called before or after step #3). If the
> line is toggling like crazy while the 3 steps are going on, it's OK if
> the interrupt handler is called more than once. In general this could
> be considered expected. That's why you Ack before handling--any extra
> edges that come in any time after the interrupt handler starts (even
> after the very first instruction) need to cause the interrupt handler
> to get called again.
>
> This is different than Brian's understanding since he seemed to think
> the Ack was happening later. If you're in front of something where
> you can add printouts, maybe you can tell us. I tried to look through
> the code and it was too twisted for me to be sure.

i think the current edge both irq flow for rk3399 would be:
gic_handle_irq //irq-gic-v3.c
handle_domain_irq
rockchip_irq_demux //pinctrl-rockchip.c
toggle polarity
generic_handle_irq
handle_edge_irq //kernel/irq
irq_ack
handle_irq_event
action->handler

so i think the race might actually exist (maybe we can add some delay
after toggle polarity to confirm)


BTW, checking other drivers, there're quite a few using this kind of
toggle edge for edge both, and they go different ways:

1/ toggle it in ack():
mediatek/pinctrl-mtk-common.c
gpio-ingenic.c
gpio-ep93xx.c

2/ toggle it before handle_irq:
pinctrl-rockchip.c
pinctrl-armada-37xx.c
gpio-ath79.c
gpio-mxs.c
gpio-omap.c
gpio-mvebu.c

3/ toggle it after handle_irq:
gpio-dwapb.c
gpio-pmic-eic-sprd.c


would it make sense to support this kind of emulate edge both irq in
some core codes?

>
>
>> >2/ rockchip_irq_set_type
>> >it's important to not having spurious irqs
>> >
>> >so we can disable irq during changing polarity only in these case:
>> >((rising && gpio is heigh) || (falling && gpio is low))
>> >
>> >i'm still confirming the spurious irq with IC guys.
> Hmmm, thinking about all this more, I'm curious how callers expect
> this to work. Certainly things are undefined if you have the
> following situation:
>
> Start: rising edge trigger, line is actually high
> Request: change to falling edge trigger
> Line falls during the request
>
> In that case it's OK to throw the interrupt away because it can be
> argued that the line could have fallen before the request actually
> took place. ...but it seems like there could be situations where the
> user wouldn't expect interrupts to be thrown away by a call to
> irq_set_type(). In other words:
>
> Start: rising edge trigger, line is actually high
> Request: change to falling edge trigger
> Line falls, rises, and falls during the request
>
> ...in that case you'd expect that some sort of interrupt would have
> gone off and not be thrown away. No matter what instant in time the
> request actually took place it should have caught an edge, right?
>
>
> Said another way: As a client of irq_set_type() I'd expect it to not
> throw away interrupts, but I'd expect that the change in type would be
> atomic. That is: if the interrupt came in before the type change in
> type applied then it should trigger with the old rules. If the
> interrupt came in after the type change then it should trigger with
> the new rules.
>
>
> I would be tempted to confirm your testing and just clear the spurious
> interrupts that you're aware of. AKA: if there's no interrupt pending
> and you change the type to "IRQ_TYPE_EDGE_RISING" or
> "IRQ_TYPE_EDGE_FALLING" then you should clear the interrupt. It's
> still racy, but I guess it's the best you can do unless IC guys come
> up with something better.
>

hmmm, right, clear the spurious irq seems to be a better way, will try
to do it in the next version.
>
>
> Anyway, it's past my bedtime. Hopefully some of the above made sense.
> I'm sure you'll tell me if it didn't or if I said something
> stupid/wrong.:-P
>
> -Doug
>
>
>


\
 
 \ /
  Last update: 2018-05-09 08:43    [W:0.064 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site